[dairoll]

Please post 08 ego settings in here, stop pm'ing!

Playing Xball, so looking for efficiency and an attempt at silence. speed goes to 13.33, so doesn't matter, So again, silence and efficiency are the necessary components. Running my ego with my 2-liter is teh sex.

For those interested, here are the stock settings for an 08 ego.

LPR: Flush
Dwell: 12.5ms (time of solenoid activation)
FSDO: 2.0ms (first shot drop off dwell increments)
Empty: 4.0ms (minimum time for the eyes to detect that the breech is empty-bolt is cleared and paintball has entered)
Ball: 4.0ms (time alloted for ball entering the chamber)
Pull: 3.0ms (minimum time to recognize the trigger pull)
Release: 8.0ms (time to recognize the trigger release)
BandHI: 75% (on opto setting(the point at which the trigger is considered pulled))
BandLO: 25% (on opto setting(the point that the trigger is considered released))
TT TOL: 0% (basically the bounce control % filter)


Hope this helps some people.
kthxbai.

[urban13]

hey. do these setting work with v4.00? what is tt ban my ego 08 doesnt seem to have?
thanks

[Rithem]

08 Ego.

Change Dwell to 15
LPR 1 turn in.

That's all you need to know.

[dairoll]

Originally Posted by Rithem

Change Dwell to 15
LPR 1 turn in.

And what does this achieve?

[rokindeEGO]

well coming from an 07 ego owner, im sure it applies to the 08 ego too.

when decreasing the lpr, you usually get less kick, and sometimes quiter.

but raising the dwell doesnt really help efficiency, so i wouldnt really do that.

Even my 07 ego works perfectly with 13 and 1/2 turn in, so i assume an 08 ego can do better.

[Rithem]

Originally Posted by dairoll

And what does this achieve?

Ability to use brittle paint.

Egos are efficient enough that you can crank the dwell up so you can use brittle paint.

Quote from Archie from X-Factor

Originally Posted by Archie

Honestly I recommend not lowering your dwell but actually cranking it up to 16 or 17 ms. The guns are so efficient even with the high dwell and it allows you to shoot the most brittle paint.

[littleking832]

anybody got good semi settings? no limit on bps, no need to be quiet or some ****, just needs to be fast and maybe efficient if possible. pm me.

[oldpops]

help guys PLEASE....

please help me with a 06 yakuza board settings please if any one would know

Thank you
Dave

[ChrisR"AXL"D]

Here are some 08 settings...."Need feedback"!

LPR / Flush
Dwell / 10
FSDO / 2
Trigger / Opto
BandLo / 25%
BandHi / 75%
TTtol / 0%
Bounce / Level 3
Release / 8
Pull / 3
Ball / 4
Empty / 4
_________________________

LPR / 1 turn in from Flush
Dwell / 15
FSDO / 2
Trigger / Opto
BandLo / 25%
BandHi / 75 %
TTtol / 4%
Bounce / TT
Release / 4.5
Pull / 3.5
Ball / 3.5
Empty / 3
_________________________

LPR / Flush
Dwell / 15
FSDO / 2
Trigger / Opto
BandLo / 25%
BandHi / 75 %
TTtol / 4%
Bounce / TT
Release / 8
Pull / 8
Ball / 3
Empty / 3

[ChrisR"AXL"D]

Originally Posted by Rithem

Ability to use brittle paint.

Egos are efficient enough that you can crank the dwell up so you can use brittle paint.

Quote from Archie from X-Factor

Just wondering what cranking the dwell up to 15 has to do with allowing our guns to shoot brittle paint.What is the science behind this?

[6PACKOFPEPSI]

stock sl74.. just looking for good settings for me to mess around with. pm me please.

[ChicagoMafia]

Originally Posted by ChrisR"AXL"D

Here are some 08 settings...."Need feedback"!

LPR / Flush
Dwell / 10
FSDO / 2
Trigger / Opto
BandLo / 25%
BandHi / 75%
TTtol / 0%
Bounce / Level 3
Release / 8
Pull / 3
Ball / 4
Empty / 4
_________________________

LPR / 1 turn in from Flush
Dwell / 15
FSDO / 2
Trigger / Opto
BandLo / 25%
BandHi / 75 %
TTtol / 4%
Bounce / TT
Release / 4.5
Pull / 3.5
Ball / 3.5
Empty / 3
_________________________

LPR / Flush
Dwell / 15
FSDO / 2
Trigger / Opto
BandLo / 25%
BandHi / 75 %
TTtol / 4%
Bounce / TT
Release / 8
Pull / 8
Ball / 3
Empty / 3

the first setting are really nice i let a few rip in the back yard and it was smooth

[ChrisR"AXL"D]

Sweet...yeah the first settings are crazy kick reduction,and air efficient.

[DMFreak]

k guys i looked through the whoole thread and couldnt find some i liked.

i need sl74 settings ASAP! i have a tourny and i wanna make sure mine r ok. i just messed with them without any knowledge and feel stupid.

im lookin for very fast, and a little air effecency would be nice cause im usin a 48/45 DXS. also i dont want settings that will make my gun chop alot. settings known to work please - pro settings are great too

sorry for sounding urgent.... I AM!!!

please help me out i would really appreciate it. pm me

[mebe007]

the idea behind a higher dwell simply puts more of a cushion of air behind the ball, essentially more air and less bolt contact. this helps you shoot more brittle paint. correct me if i am wrong though. this was my experience with 12 years of impulses though.

although it doesnt matter that much with my imp as i run 140psi input and 7.5ms dwell with 88psi lpr. but yeah thats for a different section.

[goallout145]

i have a stock 07 ego. i think the trigger wasnt messed with either. what settings do i use to get my gun to ramp the fastest possible.

[Lite_em_up]

Originally Posted by mebe007

the idea behind a higher dwell simply puts more of a cushion of air behind the ball, essentially more air and less bolt contact. this helps you shoot more brittle paint. correct me if i am wrong though. this was my experience with 12 years of impulses though.

although it doesnt matter that much with my imp as i run 140psi input and 7.5ms dwell with 88psi lpr. but yeah thats for a different section.

ok to clear up some confusion here

dwell is the amount of time the solenoid stays open and releases air. At a certain point there is know more air (that would aid in firing the ball) to be released. This is where tuning comes into play, wat u want to do is raise ur dwell at the chrono until the shot is not affected by the dwell and then drop it one point from there (u have to pass the point to find it). this is YOUR guns optimal dwell setting, every gun is a little different and needs different amounts of dwell because all solenoids are not created equally. as far as not wanting to break paint the way ull do that is by using less pressure (lower hpr) and the way to do that is to shoot in the 280's instead of the 300 zone, that will help if ur gun is breaking paint because ur using less pressure per shot and thats less air impacting the ball, as far as the lpr keep it flush but if u want to "tune" it wat u do is after u set ur dwell u then set ur hpr to the 280's, proceed then with turning ur lpr in slowly until ur consistency is not good or ur fps drops , then back it out a quarter turn (b/c u have to pass the point to find it) that is then ur optimal lpr

i just explained how to set ur gun up individually to YOUR own gun, doesn't matter the year the ups or anything so this and those are the setting us should use and if ur too lazy to do this use stock

THESE STEPS WILL MAKE YOUR EGO PERFORM AT IT'S BEST

btw if u do this make sure ur using good paint or u will get inaccurate results

EDIT: as far as fsdo if u get that with ur ego bump that up one notch at a time until ur first shot equals the rest of ur shot average

[Illusionballer* (Banned)]

Does anyone have some good filtering settings? All my trigger screws are stripped from the previous owner so the trigger pull is a bit long and snappy, not very heavy though.

Right now I have them set to:
Debounce - Custom
Empty - 1.5
Ball - 1.5
Release - 4
Pull - 4
Band Hi - 95% (factory)
Band Lo - 5% (factory)
TTtol - 0%

I am not really sure how to go about my Band Hi/Lo as I have a very bouncy marker, it will go on it's own if I do not have the debounce at 9. I can hit 15bps but I know somehow I am being limited from going to 16.

[yoshisego]

Whan u say band what do u mean ther band hi and low

[XUppercutX]

Stock Ego8. Leaving it stock settings till it breaks in, but after that.

Some nice air efficient and flat shooting settings.

Just dwell and LPR.

Thanks.

[Pizzaman232]

ego7 with 3.00 software

i need efficence... able to use brittle paint and less kick...basically i need some different settings to tryout...