Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 05-03-2008, 08:28 PM #1
phazeshifter
☠Resist☠
 
phazeshifter's Avatar
 
Join Date: May 2003
Location: Dirty Jersey
 has been a member for 10 years
Now this is strange....help needed

Hey guys,
Was going through and getting my gear ready for tomorrow. I always clan my gear after I play and also give everything a run-through before I pack my gearbag back up. So I aired up the Legend and filled the loader with some zballs to make sure everything was working fine and velocity was on point. It will not shoot and actually turns itself off. here is what happens:

***NOTE: Tadao Board Installed***

Gun turns on and blinks green showing good battery before turning into a blinking blue(blinking blue means no ball in breach)

I put a zBall into breach and led turns solid blue(this states gun is ready to fire)

Pull the trigger, nothing happens and the LED goes off.

I tried this a few times same result and I actually have to hold the button to turn gun back on. I tried turning it on then switching to dry-fire setting and it does same thing. However if I turn on and do not put anything in the breach(blinking blue) and pull trigger it stays on, but once it is solid blue(rdy to fire) after first trigger pull, goes off.

Here is what I have already done:

-New batterys(I used a fresh rechargeable and even a brand new 9volt)
-Different tanks(both were at roughly 35k fill and worked fin when testing my EGO6 earlier)
-When tanks screw in and I turn ASA on, you can hear it airing up properly

Any ideas guys?
phazeshifter is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-03-2008, 09:13 PM #2
asdffdsaasdf
Smasher of Keyboards
 
asdffdsaasdf's Avatar
 
Join Date: Sep 2006
Location: St. Louis - IL Side
its definitely something with the board

call tadao and see what their warranty covers
__________________

Infinity Legend Parts Swap
asdffdsaasdf is offline   Reply With Quote
Old 05-04-2008, 03:13 AM #3
Swick21
 
 
Swick21's Avatar
 
Join Date: Jun 2007
check to make sure no wires are frayed/fraying and have good connection?
__________________
I WANT YOUR LEGENDS
http://www.pbnation.com/showthread.p...2#post51953222
#21 Team Ambition
www.Blacklistvideo.com
Swick21 is offline   Reply With Quote
Old 05-05-2008, 02:17 PM #4
phazeshifter
☠Resist☠
 
phazeshifter's Avatar
 
Join Date: May 2003
Location: Dirty Jersey
 has been a member for 10 years
wires look fine, and the strange part is it worked fine all day. Came home and then wanted to shoot some z-balls and it started doing what I described above
phazeshifter is offline   Reply With Quote
Old 05-05-2008, 03:06 PM #5
phoenix03
People do things
 
phoenix03's Avatar
 
Join Date: Dec 2006
Location: 478
make sure dwell in not too low
__________________
Droid
phoenix03 is offline   Reply With Quote
Old 05-05-2008, 06:35 PM #6
pb_executioner -_- (Banned)
MZ REACTION#79
 
Join Date: Apr 2007
Location: 305 miami baby!!!!
well this rarely happens, but my teammate had the same problem and apparently his plug got loose so it wasnt connected to the noid.so it would not fire or hear the noid click, and the gun turned on and went off.
pb_executioner -_- is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump