Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-18-2008, 12:32 PM #1
psycho91
making a come back
 
psycho91's Avatar
 
Join Date: Mar 2008
Location: jacksonville, FL
conversion kit

i was wondering if they had a kit to take ur phantom from stock class to open class
psycho91 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 03-18-2008, 01:10 PM #2
Pump Scout
Old gun,new gun,whatever
 
Pump Scout's Avatar
 
Join Date: Aug 2002
Location: Central Wisconsin
Annual Supporting Member
Pump Scout is a Mega Moderator
Pump Scout is a Supporting Member
 has been a member for 10 years
Pump Scout supports Bob Gurnsey
Pump Scout is one of the top 100 posters on PbNation
Direct feed breech/body. CCI sells them as left, center, or right feed. Other than that, if you've got a 12-gram changer as the rear part of the body, you need the rear ASA part (also available through CCI). If you run a 12-gram changer as an add-on either vertical, off the rear ASA, or on a bottom line, just replace the changer with a tank.

Phantom's are pretty modular. Wish I could get comfortable with one.
__________________
WISCONSIN NAVARONE
Grey Empire Axe BODY FS . . Hammerhead Dominator barrel FS
Inception Designs . . . Empire Paintball

Flying to events? Check out BHTP to protect your travel and your bags!
Pump Scout is offline   Reply With Quote
Old 03-18-2008, 01:20 PM #3
psycho91
making a come back
 
psycho91's Avatar
 
Join Date: Mar 2008
Location: jacksonville, FL
yeah iv got a mico dropout phantom pistol and i dont like the ten round tubes
psycho91 is offline   Reply With Quote
Old 03-18-2008, 01:43 PM #4
Pump Scout
Old gun,new gun,whatever
 
Pump Scout's Avatar
 
Join Date: Aug 2002
Location: Central Wisconsin
Annual Supporting Member
Pump Scout is a Mega Moderator
Pump Scout is a Supporting Member
 has been a member for 10 years
Pump Scout supports Bob Gurnsey
Pump Scout is one of the top 100 posters on PbNation
http://www.phantomonline.com/paintballguns/parts.htm

You need Part #5 to replace your dropout. Or, #50 with the rest of that subassembly to run a 3.5oz off the trigger guard. But #5 will let you run a backbottle setup.

And one of the #2's.
__________________
WISCONSIN NAVARONE
Grey Empire Axe BODY FS . . Hammerhead Dominator barrel FS
Inception Designs . . . Empire Paintball

Flying to events? Check out BHTP to protect your travel and your bags!
Pump Scout is offline   Reply With Quote
Old 03-18-2008, 01:44 PM #5
akatch79
 
 
Join Date: Oct 2004
 has been a member for 10 years


Assuming you already have a VSC .45 Phantom, you will need part 2 for open class feed and an ASA/rail setup if you want to use a tank mounted to the grip. You could just take out the hardline and use regular macro going from the rear fitting to the ASA (leaving the vertical changer as a foregrip), or you could simply take out the bucket changer and screw your tank directly into the vertical feed. Good luck!
__________________
"Those who can make you believe absurdities can make you commit atrocities"
- Voltaire
A
akatch79 is offline   Reply With Quote
Old 03-18-2008, 01:53 PM #6
psycho91
making a come back
 
psycho91's Avatar
 
Join Date: Mar 2008
Location: jacksonville, FL
no, i have a phantom pistol, yeah i looked at some pics i get wat ur saying

Last edited by psycho91 : 03-18-2008 at 02:10 PM.
psycho91 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump