lpr???viking

destroywhat1987 · 02-09-2008, 04:03 PM

how do i turn the lpr down on my 03 viking???
clockwise or counterclockwise?

TOCeltic · 02-09-2008, 04:34 PM

it should be counterclockwise if memory serves.

MSgtWolf · 02-09-2008, 04:37 PM

its not advised that you mess with LPR pressure without having a toolkit gauge to ensure that your not over pressurizing the solenoid.

With that being said...off the top of my head I believe turning it down would be counterclockwise

MeuroM · 02-09-2008, 06:00 PM

And if I understood correctly, it should be set from zero going up, and not adjusted down, if it's a SCM..

phat4life07 · 02-09-2008, 06:10 PM

There is a way to set your LPR without the tool kit.

1.) Make sure your regulator is set to 200 psi, on sidewinder the bottom screw should be flushed with the base.
2.) Set your dwell right, with Humphrey noids dwell should set to 10, and with MAC noids your dwell should be 17.
3.) Turn your LPR all the way down then start turning it up until your marker is shooting 275-280.

That should set your LPR to around 70 PSI.

destroywhat1987 · 02-09-2008, 09:29 PM

cool thanks guys, that what i needed to know.