[D-Paint]

First off, please dont flame, I went through the stickys, i dont have a manual, and i downloaded the online manual. And yes i have a new Duracell battery in it.

Now, I am fairly new to ego's and new to high ends for that matter(I came from an ICD Promaster). I bought this ego used about a month ago. It is an maniac 06 ego with the maniac board and star reg, but it didnt come with the cure bolt. I am getting horrible efficiency(i aired up my 68/45 to 3800 psi, shot only 2 hoppers through it and i was left at about 2200 psi)! I found how to change the settings but have no clue what they mean. here are my settings....
dbounce: level 1
tt tol: 0%
band lo: 35%
band hi: 65%
release: 4ms
pull: 2ms
ball: 4ms
empty: 4ms
dwell: 9ms
fsdo: 2ms
And my dbounce changes levels by it self, now its saying levels 3? Is that normal? Oh, lpr looks about 2 turns past flush.

So if someone can pleaseee give me some settings that will work good and get some better efficiency please let me get them. If not, can someone give me some tips on what some of the settings mean or some ball park ranges i should try. Any help is appreciated! Thanks.

[angry bucket]

dwell at 10 lpr turned to flush

[djklever]

is it bouncing alot?

[~Proto~]

isnt flush zero psi?

any way reset board settings and lpr two turns in.

[ice_beachball]

Look for the official settings thread. Then look for Bumpb's setting on the first page. Set them to that and change to your ego. All egos are different, so my settings won't effect your gun in the same way it does mine. Debounce settings are also effected by your trigger...change them to the pull of your trigger.

[D-Paint]

lpr looks 2 turns past flush, what do u mean by does it bounce alot? the trigger? how do u reset the board to factory? thanks

[littleman55]

Put the LPR flush, and set your dwell to 10. That should help you..

[ice_beachball]

Reset the board...

With the gun on, take off the grip on right side, press and hold the red button till the menu pulls up. Scroll up or down until you see reset. Click, then choose yes.

[Chuckles23]

Originally Posted by ~Proto~

isnt flush zero psi?

any way reset board settings and lpr two turns in.

Hell no. Flush is the best as far as the lpr goes.