First off, please dont flame, I went through the stickys, i dont have a manual, and i downloaded the online manual. And yes i have a new Duracell battery in it.
Now, I am fairly new to ego's and new to high ends for that matter(I came from an ICD Promaster). I bought this ego used about a month ago. It is an maniac 06 ego with the maniac board and star reg, but it didnt come with the cure bolt. I am getting horrible efficiency(i aired up my 68/45 to 3800 psi, shot only 2 hoppers through it and i was left at about 2200 psi)! I found how to change the settings but have no clue what they mean. here are my settings....
dbounce: level 1
tt tol: 0%
band lo: 35%
band hi: 65%
And my dbounce changes levels by it self, now its saying levels 3? Is that normal? Oh, lpr looks about 2 turns past flush.
So if someone can pleaseee give me some settings that will work good and get some better efficiency please let me get them. If not, can someone give me some tips on what some of the settings mean or some ball park ranges i should try. Any help is appreciated! Thanks.
Look for the official settings thread. Then look for Bumpb's setting on the first page. Set them to that and change to your ego. All egos are different, so my settings won't effect your gun in the same way it does mine. Debounce settings are also effected by your trigger...change them to the pull of your trigger.