[frankdatank62089]

know some one with a vibe and when aired up the bolt travels forward never creating a seal and allows air to escape through the feedneck. please pm me with the problem and solution so i can fix it for them. thank you

[KAR98]

Are you sure the tank is not almost empty?...
Is the bolt greased correctly?... Is it clean?...
Should also check Bolt Orings....

[Sean@smartpartswest]

Sounds like the oring on the bolt is not sealing. Stock Bolt? Or did he put in an after market bolt?

[frankdatank62089]

its stock ill go through the orings.

[z4pp]

To clarify- the bolt goes forward and starts leaking when you first put in air, or is this when you are shooting? If it is when you air up, that means it is a leak in the air system that pushes the bolt back, which would be the bolt or breech O-rings, the conections to the front banjo, the banjo itself, or the solenoid. Sinc the air is coming out of the feedneck/barrel area, it's probably the front breach seal O-ring or the bolt O-rings.

[frankdatank62089]

perfect. i still got oring kits from many guns i used to own from sp. i think i have a shocker one as well as maybe a ion kit. would the oring be found in these kits or am i going to need to order one?

[pbkid07]

I'd imagine you could find one in the Ion kit seeing the guns are similar in alot of ways.

[Sean@smartpartswest]

Same as the ION bolt oring. It will be green. Not the ones in the shocker kit, but in the Ion kit.