The manual is self explanatory. If i remember correctly the dip switches i on the board. It has either and up or down switch. It allows you to cap the marker at 15bps (i think that is what is for) and also turn the tournament lock on). To program the board, just hold the trigger and turn the marker on. It will flash multiple colors stating taht you are in training mode now.
It is simple...Hold down trigger. turn on marker with trigger being held in. It will then flash multi-colors. release trigger. it sould be on a color. pull trigger to mode (color) needed. Pull trigger and hold it untill it begins to flash (count blinks) after it is done blinking, then pull trigger the number of times to reach you setting. after that it will re-blink the number you have pulled trigger too. If you are done with adjustments, turn off marker and it is good from there.