[corporate ghost]

Hi, I put an APE Rampage Board on my Tippmann 98, all is good until when I'm firing with my gun pressurized, when I'm doing this, my board gets mad. I explain:

I put my board in my marker. While my gun isn't pressurized, all works perfectly, I can change my firing modes, semi-auto, burst, full-auto, response, rampage ... all these are functionnal only while my gun isn't pressurized. As soon I put my bottle on my marker, the things gets worst... My marker is only firing full auto, I change my modes, I can switch to any modes it will only shoot on full auto. I remove my tank and I can change my modes and all works.

Don't say to me it's because my bottle is empty cause isn't. I test it with many different bottles that were all filled.

If you can help I would appreciate it, cause now I'm pissed off because I can't play with my APE.

Thank you!

[XSVFAN890]

You either have the wrong sear spring in, or it's programmed for an A-5...that's all I can think of.

[biggm28]

Originally Posted by XSVFAN890

You either have the wrong sear spring in, or it's programmed for an A-5...that's all I can think of.

Thats the logical anwser.

[drigerV88]

have u tried battery??

[Gdude2008]

Check the battery and the sear pin that it is correctly seated. Sometimes the kick will move that pin and it'll do weird stuff.

Good Luck