[Nate..]

I am looking for some freak barrel inserts because i have no idea where to get them cause i only have the .693 insert and im shooting the nelson anarchy paintballs.

[lustaficko]

You can try to find an internet site that has them in stock. They're pretty popular items so PunishersPb.com will probably have a full stock.

http://www.punisherspb.com/Search.as...inserts&page=1


enjoy.

[Nate..]

Alright and also my gun came with the freak stainless steel back with the aliminum front should i just buy the all alluminum barrel and then the insert kit or what is your suggestion on that

[lustaficko]

There is really no difference in performance between the aluminum back and the stainless back. All the aluminum does is shave off a little weight. Honestly, if you're interested getting a new aluminum back, I would personally just upgrade the whole barrel. Deadlywinds makes a carbon fiber barrel that uses freak inserts and is a very good barrel. It combines the accuracy of a freak with the lightness and durability of carbon fiber.

However if you do decide to get a new back, make sure to just get the back. No need for an entirely new barrel. And most important of all:

WHATEVER YOU GET MAKE SURE THAT IT IS IMPULSE THREADED!

[shadowlord06]

They will perform the same though you may want one to complete the look of your gun. Yes we paintballer's are allowed a little vanity

[Nate..]

Whats the best insert size to use for the nelson anarchy paintballs

[lustaficko]

I've never herd of them or used them.

[RHChan84]

Best sizes of inserts to buy would be .689 and .691

[Nate..]

Ya i havent shot them yet this place that we got sponsored by carries them and they said there the best paintballs they carry so we took them

[lustaficko]

I like:

.679
.684
.689
.693

[RHChan84]

I have a complete set and I mainly use .687, .689, .691, and .693 when it's really cold out. And the .687 is mainly used for reballs.

[Nate..]

Alright and even though this isnt really suppose to be on this but does it matter if its low or high pressure for the nerve

[RHChan84]

Either is fine but HP will work better unless you have a LP with a good recharge rate. LP tank with bad recharge rate can cause drop-offs. I use PMI and Crossfire and both are HP and works fine.

[WorldStrike]

Nelson Anarchy has a bore size of .685.

[Nate..]

Have you ever shot them?

[lustaficko]

I believe that there is a thread in the paint sub-forum that has all the bore sizes. That's probably where this information comes from. If that's the case, get the .687 sized insert if you will only use the archery paint.

[wils91]

i only ever used a 693. & .691 and occasionaly a .695 when it was hot and humid outside in the summer

[GoblyGoop]

i shot hemmorage (nelson like your anarchy) and its a 685 sometimes slightly higher.

[hereiskyle]

just buy a whole kit. you can find them for like $45 in the B/S/T forum