Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 08-23-2007, 08:11 PM #1
BlueImpulse
Tried & True
 
BlueImpulse's Avatar
 
Join Date: May 2007
Location: Middle GA
Arrow Official Impulse Database **no photos*specification text only**

Got the go ahead from Lamorte on this, so away we go!

I was browsing through the Autococker Database over on PBR, and thought it might be helpful to have an Impulse Database consisting of marker specs, setup, and performance info. Anyone needing advice could browse through and find a similar setup for use as a good starting point to tune their own, or just compare their setup with others.

A couple important notes:

****This thread is not a pic thread, that's what the Official Pic Thread is for. Links to pics are OK, any posts with physical pics will be deleted. Also, keep it strictly specification text only, no chatting, questions or comments. Thanks.

Instructions: Copy and paste the text below into your post and fill in your information. I know that not everyone will be able to complete everything on the list, so just do what you can. If you don't use an LPR setup just substitute what type of solenoid optimizer (if any) you use in it's place, e.g. Tapeworm, VFF, etc. If you would like and are able to do so, add your other board settings, any special tweaks to your setup, customizations, etc. in the "Comments" section. Thanks, Blue.

Quote:
Originally Posted by VcityBaller_Impy View Post
[...]You guys forgot trigger[...]
Added it to the master list. Previous posters: Please update your data if you get the opportunity

Body Type and Color:
Frame:
Trigger:
Board:
Bolt and pin:
Hammer:
Ram:
Ram Housing:
LPR:
Valve:
Ball Detents:
Feedneck:
Regulator:
Barrel:
Hopper:
Air Tank:

Internals Weight:
LPR Pressure:
Inline Pressure:
Dwell Setting:
Consistency:
Efficiency:

Comments:

Last edited by BlueImpulse : 03-04-2008 at 10:43 AM.
BlueImpulse is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 08-23-2007, 08:12 PM #2
BlueImpulse
Tried & True
 
BlueImpulse's Avatar
 
Join Date: May 2007
Location: Middle GA
Body Type and Color: Elia Custom UL Body, Blue/Black Acid Wash
Frame: v3 I Frame
Trigger: Modded CP DM4 Roller
Board: Morlock/ Reflective Eye
Bolt and pin: Modded NDZ Stubby Delrin Bolt, NDZ Ti Pin
Hammer: SS Rathole
Ram: NDZ SlikShot
Ram Housing: NDZ HE
LPR: Palmers Micro Rock
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: CCM Clamping
Regulator: CP Shorty LP
Barrel: 14" Freak
Hopper: NOXed VLocity Jr
Air Tank: Nitro Duck X-Stream 68/4500

Internals Weight: 984 gn
LPR Pressure: 100 psi
Inline Pressure: 165 psi
Dwell Setting: 9 ms
Consistency: ±4 fps
Efficiency: 1000-1200 shots from a 68/4500

Comments:

__________________

Body Type and Color: EPB Mouse, Dust Blue
Frame: Stock
Trigger: NDZ Blade, Magnetic return
Board: Blue Light Cricket
Bolt and pin: A+ Anodizing, Eclipse Pin
Hammer:NDZ Midweight
Ram: NDZ Slikshot
Ram Housing: SP
LPR: SP Mini Maxflo
Valve: Eclipse
Ball Detents: Eclipse/ EPB ?
Feedneck: Check-It SureFit
Regulator: WGP Ergo
Barrel: 12" Freak
Hopper: Empire Reloader
Air Tank: Nitro Duck X-Stream 68/4500

Internals Weight: ? gn
LPR Pressure: 80 psi
Inline Pressure: 165 psi
Dwell Setting: 5.5ms
Consistency: ±3 fps
Efficiency: 1200-1300 shots estimated from a 68/4500

Comments:

Last edited by BlueImpulse : 08-16-2009 at 07:27 AM.
BlueImpulse is offline   Reply With Quote
Old 08-23-2007, 08:30 PM #3
Habit88
 
 
Habit88's Avatar
 
Join Date: Jul 2007
Location: the RoC, NY
Body Type and Color: Stock Black
Frame: Stock
Board:Stock
Bolt and pin: Ndz equalizer and Titanium Pin
Hammer: Ndz (not sure on weight)
Ram: n/a
Ram Housing:n/a
LPR: Jackhammer 2/ Ndz LPR combo (have both not sure which im gonna run)
Valve:Ndz Rip Valve
Ball Detents:Stock
Feedneck:Ndz Lo and High rise
Regulator: horizontal Max Fugly
Barrel: Freak/Progressive
Hopper: Halo B
Air Tank: Crossfire 68/45 (on the way)

Internals Weight:n/a
LPR Pressure:n/a
Inline Pressure: n/a
Dwell Setting:n/a
Consistency:n/a
Efficiency:n/a

comments: got mine the other day haven't tested yet on the count of i don't want to run co2

Last edited by Habit88 : 08-23-2007 at 11:07 PM. Reason: needed it
Habit88 is offline   Reply With Quote
Old 08-23-2007, 09:11 PM #4
rb211
Impulse Aficionado
 
rb211's Avatar
 
Join Date: Mar 2006
Location: Marietta, GA.
Body Type and Color: Toxic / Dark grey - light grey fade
Frame: Stock
Trigger: NDZ Pro-Mag
Board: WAS
Bolt and pin: NDZ Equalizer / NDZ Ti
Hammer: SS Rathole
Ram: Slickshot
Ram Housing: NDZ HE
LPR: NDZ / ANS Combo
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: Q-Lock
Regulator: Stock vert Maxflow
Barrel: Freak
Hopper: Reloader B
Air Tank: 88/4500

Internals Weight: 1106g
LPR Pressure: 60
Inline Pressure: 135
Dwell Setting: 7.5
Consistency: +/- 5
Efficiency: ?

Body Type and Color: Nasty - Blue/Orange fade
Frame: Stock
Trigger: NDZ Pro-Mag
Board: WAS
Bolt and pin: NDZ Equalizer / Ti pin
Hammer: NDZ SS Rathole
Ram: Slickshot
Ram Housing: NDZ HE
LPR: NDZ / ANS combo
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: Q-Lock
Regulator: Stock vert Maxflow
Barrel: Freak
Hopper: Reloader B
Air Tank: 88/4500

Internals Weight: 1106g
LPR Pressure: 60
Inline Pressure: 135
Dwell Setting: 7.5
Consistency:
Efficiency: ?

Body Type and Color: Rat LTD / Dust Silver
Frame: Stock
Trigger: NDZ Pro-Mag
Board: Scenario Dreams Universal T-Board w/ breakbeam eyes
Bolt and pin: FBM Mercury / NDZ Ti pin
Hammer: NDZ SS Midweight
Ram: Slickshot
Ram Housing: NDZ HE
LPR: NDZ / ANS combo
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: Q-Lock
Regulator: Stock vert Maxflow
Barrel: Freak
Hopper: Reloader B
Air Tank: 88/4500

Internals Weight: 1106g
LPR Pressure: 60
Inline Pressure: 135
Dwell Setting: 7.0
Consistency:
Efficiency: ?

Body Type and Color: Adrenalin - Dark blue / light blue fade
Frame: AIM
Trigger: AIM double
Board: Blackheart
Bolt and pin: FBM Mercury / Adrenalin pin
Hammer: NDZ SS
Ram: Slik Shot
Ram Housing: Stock Adrenalin
LPR: NDZ / ANS combo
Valve: RIP
Ball Detents: Adrenalin
Feedneck: Q-Lock
Regulator: CP Shorty
Barrel: Freak
Hopper: Reloader B
Air Tank: 88/4500

Internals Weight:
LPR Pressure: 80
Inline Pressure: 110
Dwell Setting: 7.5
Consistency:
Efficiency: ?

Comments: I'm still tweaking the pressure/dwell settings - I have no idea how many shots I get off of the 88, it's a lot though....

Last edited by rb211 : 02-23-2009 at 03:07 PM. Reason: Changes
rb211 is offline   Reply With Quote
Old 08-23-2007, 09:24 PM #5
Snowball13
 
 
Snowball13's Avatar
 
Join Date: Mar 2007
Location: Africa
Snowball13 helped look for balloons
Snowball13 owns a Planet Eclipse Ego
Snowball13 supports Team VICIOUS
Snowball13 is for the Gunfight
Body Type and Color: Cash Money from MikesPaintball. Silver with a little blue.
Frame: Stock 45*
Board: BlackHeart (hope to get WAS soon)
Bolt and pin: Shocktech supafly with ST lightweight pin
Hammer: SS Rathole
Ram: NDZ Slicshot
Ram Housing: NDZ
LPR: NDZ ultimate LPR combo with an AKA SCM switched with the JH2
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: Redz low-rise clamping
Regulator: Maxxy
Barrel: Freak with All American front-14"
Hopper: Halo B
Air Tank: Nitro Duck 68/4500, Crossy 48(I think)/3000-needs hydro

Internals Weight: ?No clue
LPR Pressure: ? 1/4 turn past lowest cycle pressure
Inline Pressure: 180
Dwell Setting: I think it's maybe 4 or 5
Consistency: Haven't gotten a chance to test with new products that I got
Efficiency: Haven't been able to shoot paint with it since I got new parts

Comments: Thanks Blue for making this. I'll update when I have the rest of my info.
Snowball13 is offline   Reply With Quote
Old 08-23-2007, 10:18 PM #6
lamorte
mod a la mode
 
lamorte's Avatar
 
Join Date: May 2003
Location: darkest depths of mordor
Annual Supporting Member
lamorte is a Supporting Member
 has been a member for 10 years
lamorte donated to help Peyton Trent
lamorte supports our troops
Arrow mah imp is pimp........

Body Type and Color: stock black w/custom jewels
Frame: stock w/black dye sticky's
Trigger: eclipse blade black with one hella trigger job
Board: vision blue light cricket w/ecs programming
Bolt and pin: ndz flush equalizer, ndz ti pin
Hammer: rat hole stainless
Ram: ndz slik-shot
Ram Housing: stock
Tapeworm: sp black
LPR: don't need one
Valve: ndz rip baby!
Ball Detents: stock
Feedneck: ccm locking
Regulator: horizontal max-flo
Barrel: main: 14" all american w/custom jewels.....spares: 14" j&j ceramic & 12" progressive
Hopper: smoke kingman lcd fasta & black evo-z board
Air Tank: (2)crossfire 68/4500's w/black dye rhino cover

Internals Weight: who cares?
LPR Pressure: don't need one
Inline Pressure: 150psi
Dwell Setting: 4.5ms
Consistency: dead nuts!
Efficiency: aprox 1400 shots from 68/4500

Comments: this is my plain looking seemingly underestimated meticulously cared for all black baby. when you look at her you say, "hmmmmm.....an impulse" when she roars, eyes get wide, heads turn, then try to duck for cover asap
__________________
☠ apr่s la mort la douleur est all้ ☠

✩☾ habitually nocturnal ☾✩
lamorte is offline   Reply With Quote
Old 08-23-2007, 11:56 PM #7
xdavekillyoux
Silent Killer
 
xdavekillyoux's Avatar
 
Join Date: Oct 2005
Location: SO*ON
Body Type and Color: Stock Black
Frame: stock with CP roller trigger
Board: W.A.S
Bolt and pin: Strange Bolt, Ti Pin
Hammer: Brass
Ram: Slick Shot
Ram Housing: NDZ HE housing
LPR: Jackhammer II
Valve: RIP valve
Ball Detents: Hybrid
Feedneck: Check-it
Regulator:FEP zero drop, AKA2 Liter+
Barrelipe kit with stiffi tip
Hopper:Halo, Velocity JR
Air Tank:Crossfire 68/45 with Myth Regulator

Internals Weight: Brass hammer.
LPR Pressure: No clue
Inline Pressure: about 145
Dwell Setting: 7ms
Consistency: +/- 1-3
Efficiency: 8-10 pods and a hopper, 6 pods consistently


Comments: I need a new hammer, I had a evil SS hammer but it broke. so now it has a bit of kick but I still love my impulse.
__________________
Proudly Sponsored by:
Soldiers Of Fortune Paintball

My feedback 19+/0
xdavekillyoux is offline   Reply With Quote
Old 08-24-2007, 12:18 AM #8
bubba69089
iMPULSe AddicT
 
bubba69089's Avatar
 
Join Date: Feb 2005
Location: c-mont
Body Type and Color:Black Rat Jr.
Frame:otb frame
Board:WAS board
Bolt and pin: White NDZ cut short with a NDZ ti pin
Hammer: Aluminum rathole
Ram: NDZ slikshot
Ram Housing: NDZ HE housing
LPR: NDZ ultimate combo
Valve: RIP valve
Ball Detents: NDZ detents
Feedneck: NDZ clamping feedneck
Regulator: CP reg.
Barrel: Full freak kit
Hopper: tricked out halo
Air Tank: PE tank 68/45

Internals Weight: IDK
LPR Pressure: IDK
Inline Pressure: Around 110
Dwell Setting: 6ms or 7ms (will check)
Consistency: +- 1-3
Efficiency: around 9-10 pods usually

Body Type and Color: Red Python
Frame:HSW Iframe v2.5
Trigger: ^^
Board: Vision Crikit
Bolt and pin: NDZ stubby and shocktech pin
Hammer: NDZ SS midweight
Ram: NDZ slicshot
Ram Housing: stock
LPR: SP lpr
Valve:NDZ RIP
Ball Detents:NDZ
Feedneck: NDZ clamping (angel)
Regulator: CP
Barrel: J&J edge Kit (cocker)
Hopper: Halo B
Air Tank: 68/4500

Internals Weight: idk
LPR Pressure: TBD
Inline Pressure: TBD
Dwell Setting: TBD
Consistency: TBD
Efficiency: TBD

Comments: Also has CVS VA. with lpr and input gauges on it for easy reading
__________________
☆†☆ Dirty Imp Owners Club ☆†☆

|Impulse Barrels (CP)|

Last edited by bubba69089 : 05-10-2008 at 03:57 PM.
bubba69089 is offline   Reply With Quote
Old 08-24-2007, 02:35 AM #9
agentdaffy007
I Kill Suckers
 
agentdaffy007's Avatar
 
Join Date: Aug 2004
Location: In front of my computah!
 has been a member for 10 years
Body Type and Color: Golden Dragon
Frame: iFrame V3
Board: WAS Equalizer
Bolt and pin: NDZ White Stubby and NDZ Ti Pull Pin without top
Hammer: NDZ Aluminium Rathole
Ram: NDZ Slikshot
Ram Housing: NDZ HE Housing
LPR: SP LPR Kit
Valve: NDZ Rip Valve
Ball Detents: Kila SIX
Feedneck: CCM No-Pro
Regulator: Dye Hyper2
Barrel: Stiffi 14" .687
Hopper: VLocity Jr.
Air Tank: Crossfire 45/4500 LP

Internals Weight: ~900
LPR Pressure: 80
Inline Pressure: 160
Dwell Setting: 7
Consistency: +/-5
Efficiency: hopper + 5 pods

Comments: I'm working on better settings...

Last edited by agentdaffy007 : 01-07-2008 at 04:19 AM.
agentdaffy007 is offline   Reply With Quote
Old 08-24-2007, 06:08 AM #10
VcityBaller_Impy (Banned)
 
Join Date: Oct 2006
Location: Loch Ness
VcityBaller_Impy is playing at Living Legends V
VcityBaller_Impy is for the Gunfight
VcityBaller_Impy is reppin' sidebar 4 life
VcityBaller_Impy supports Pev's Paintball
VcityBaller_Impy has achieved Level 3 in PbNation Pursuit
Body Type and Color:Stock 2003 Body with Purple Jewels, Black to green fade
Frame:Stock
Trigger:Eclipse Blade
Board:Blackheart
Bolt and pin:NDZ Equilizer,ST PIN
Hammer: stock
Ram: ndz slikshot
Ram Housing:stock
LPR:LPRs are just another thing to screw up...
Valve:WS Function
Ball Detents: One stock (long) and one chrome eclipse
Feedneck: ST clamping
Regulator: evil detonator
Barrel: Progressive
Hopper: Empire B
Air Tank: 47/3000, 850psi Imput

Internals Weight: dunno,havent checked
LPR Pressure:none
Inline Pressure:about 160
Dwell Setting:5.0ms, but isnt chronoed, could prolly lower it
Consistency:+/- 4 when set right..+/-12 right now cause it was just rebuilt and needs to be greased.really really bad.
Efficiency:About 600 off my 47/3000, but thats an estimate

Comments:Relatively nice, unique anno, shoots pretty good when set right, no FSDO. You guys forgot trigger, I listed mine.also,adrenalin GP slide check..also as for pressure,and dwell,both will be lower once i get my seal kit and valve (both shipped..)also,from what i can see and what i was told it was a shockwave canada pro gun.im pretty sure its in 300fps.not sure,if the green/black 2k3 in that is a stock body its mine.it might be a FF not sure (in 300fps)

Last edited by VcityBaller_Impy : 03-28-2008 at 03:56 PM. Reason: forgot to space in between colon and words, gave me smilies lol edit again for weight
VcityBaller_Impy is offline   Reply With Quote
Old 08-24-2007, 01:05 PM #11
mrxr250rider
 
 
mrxr250rider's Avatar
 
Join Date: Apr 2006
Location: avoca,pa
Body Type and Color: milled black and raw
Frame: silver v2.5 iframe,milkman derlin scythe
Board: WAS
Bolt and pin: ndz eq stubby,derlin pin
Hammer: ndz super lite rathole
Ram: ndz slickshot
Ram Housing: ndz he
LPR: ndz
Valve: ndz rip
Ball Detents: ndz
Feedneck: ndz pro lock
Regulator: aka sidewinder
Barrel: freak with stiffi tip
Hopper: pulse
Air Tank: 68/3k crossy

Internals Weight: 900 grains? very light
LPR Pressure:
Inline Pressure: 150ish
Dwell Setting:6ms
Consistency:
Efficiency:

Comments:26bps goldwaved
mrxr250rider is offline   Reply With Quote
Old 08-24-2007, 05:09 PM #12
Illusion_nick
ืImpulseื
 
Illusion_nick's Avatar
 
Join Date: Nov 2006
Location: Boston, Massachusetts
Illusion_nick supports Cereal Killerz 2
Illusion_nick owns a Planet Eclipse Ego
Illusion_nick supports Team VICIOUS
Illusion_nick posts videos on PbNation
Illusion_nick supports our troops
Body Type and Color: Black Elia Milled Body
Frame: V.2 I-frame or OTB frame
Trigger: iframe - Custom delryn trigger / OTB - Stock
Board: WAS board and Eye
Bolt and pin: NDZ EQ bolt and NDZ TI bolt pin
Hammer: Evil Punch
Ram: Evil Punch
Ram Housing: Evil Punch
LPR: Tapeworm
Valve: NDZ RIP valve
Ball Detents: NDZ Detents
Feedneck: Trinity Clamping Neck
Regulator: AKA Sidewinder Short
Barrel: Freak back w/ AA tip
Hopper: Vlocity
Air Tank: 70 ci 4500 psi Crossy

Internals Weight: ???
LPR Pressure: N/A
Inline Pressure: 140
Dwell Setting: ? i forget ?
Consistency: +/- 7
Efficiency: about 750 paintballs from the steely

Comments: I Couldnt Be Happier!
__________________
_____________________________________________
Impulse-Owners
My Classic Impulse


Last edited by Illusion_nick : 09-22-2008 at 11:28 AM.
Illusion_nick is offline   Reply With Quote
Old 08-26-2007, 11:13 PM #13
The_Lead_Factor
Suck it Trebek!
 
The_Lead_Factor's Avatar
 
Join Date: Dec 2006
Location: Long Island, HiVi
Body Type and Color: Silver to Blue Freak Factory
Frame: Stock
Board: Criket w/ ECS
Bolt and pin: Strange w/ Freak Factory pin
Hammer: NDZ Mid weight
Ram: NDZ Slickshot
Ram Housing: NDZ w/ stock backcap
LPR: SP Tapework
Valve: Stock
Ball Detents: NDZ
Feedneck: CCM No-Rise
Regulator: Vert Maxxy
Barrel: Stainless Steel Freak(.693) w/ 14inch All American front
Hopper: Gangster'd Vlocity Jr.
Air Tank: 68/45 Max-Flo Micro & 92/45 Mac Dev Conquest

Comments: Sold before I had a chance to test the new internals
__________________
☆†☆ IMPULSE DATABASE ☆†☆
Closed Bolt Ballers


"Originally posted by DangerousPower: This then preceded to us blindfolding each other and wacking each other off till the first one "came to forwishing" if you know what i mean."

Last edited by The_Lead_Factor : 03-02-2008 at 05:54 PM.
The_Lead_Factor is offline   Reply With Quote
Old 08-27-2007, 12:20 PM #14
Imp_MoFo
 
 
Imp_MoFo's Avatar
 
Join Date: May 2007
RESERVED
__________________
*When a scientist states that something is possible, he is almost certainly right.
When he states that something is impossible, heis very probably wrong.
*The only way of discvering the limits of the possible is to venture a little way past them into the impossible.
*Any sufficiently advanced technology is indistinguishable from magic.

-Arthur C. Clarke's three laws of technology
Technology: the human-sponsored variant of evolution...
Imp_MoFo is offline   Reply With Quote
Old 01-04-2008, 09:07 PM #15
serafin_X
the Lumberjack
 
serafin_X's Avatar
 
Join Date: Jul 2006
Location: Detroit
serafin_X is playing at Living Legends VII
serafin_X is an NCPA player
serafin_X supports DLX Technology
Body Type and Color: Stock/Black with red parts
Frame: stock w/Red Dye grips
Trigger: CP Roller
Board: W.A.S
Bolt and pin: ST Supafly, Ti Pin
Hammer: Stock
Ram: Stock
Ram Housing: Stock
LPR: Jackhammer II
Valve: Stock
Ball Detents: Stock
Feedneck: some kinda clamp lock like a q-lock but not quite
Regulator: Vertical Max-Flow
Barrel: Ultralite
Hopper:Halo
ASA: CP mini-rail/CP on/off
Air Tank: Pure Energy 68/4500

Internals Weight: ??
LPR Pressure: whatever it gets set to at the chrono
Inline Pressure: 160ish
Dwell Setting: 6ms
Consistency: +/- a lot, it hasn't been fine tuned
Efficiency: haven't test since tapeworm/lpr. Was a Halo and 1.75 pods on a 48/3k.


Comments: Still some work I've got to do to it. I'm getting an I-frame, CP reg or Hyper 2, RIP valve, and tarantula black widow milling for it eventually. Maybe a 15* kick for the reg too. Right now is the first time since I owned her that she's 100%.
serafin_X is offline   Reply With Quote
Old 01-04-2008, 09:50 PM #16
TheImPgoD
Big Fruit Cup
 
TheImPgoD's Avatar
 
Join Date: Sep 2006
Location: Choppa Talk GDT pow-pow
TheImPgoD is one of the top 500 posters on PbNation
Body Type and color: Custom milled by Elia PB, dust black anno
Trigger: NDZ pro trigger, FBM delrin.
Board: WAS, of course.
Bolt and pin: Strange/Function, Rat
Hammer: Eclipse Titanium/NDZ mid weight
Ram: Slik shot/ Eclipse Titanium
Ram Housing: HE ram housing
LPR: SP
Valve: RIP valve
Ball Detents: NDZ/Eclipse fangz
Feedneck: Q-lock
Regulator: CP shorty
Barrel: Freak
Hopper: Halo B
Air Tank: PE 68/45

Internals Weight: I think it was 1100 last time I checked.
LPR Pressure: 100 some..
Inline Pressure: 140
Dwell Setting: 7
Consistency: +/- 5
Efficiency: Hell if I know

Adding my RAT

Body Type and Color: Older RAT
Frame: v3 iframe
Trigger: stock iframe (hopefully a FBM soon!)
Board: Morlock
Bolt and pin: NDZ Eq, my homemade delrin pin haha
Hammer: Eclipse Titanium
Ram: slickshot
Ram Housing: ndz
LPR: sp
Valve: rip
Ball Detents: ndz
Feedneck: qlock
Regulator: CP shorty
Barrel: Freak, of course.
Hopper: Halo...
Air Tank: 68/45 pe

Internals Weight: Around the same as the other imp
LPR Pressure: 110
Inline Pressure: 160
Dwell Setting: 5
Consistency: havent chronoed it yet, fool
Efficiency: ^

Comments: rips.
__________________
_______________
____________
_________
______
___

RAINBOW<3

Last edited by TheImPgoD : 10-10-2008 at 10:51 PM.
TheImPgoD is offline   Reply With Quote
Old 03-01-2008, 07:07 PM #17
PDXMark
flopy head and beedy eyes
 
PDXMark's Avatar
 
Join Date: Jan 2006
Location: Portland, Oregon
#1 [sig]
Milled stock black body
Iframe v2
Milkman prototype
WAS Equalizer v2.9
FBM Mercury bolt w/ rare Ti NDz pin
NDz Mid-weight SS
NDz Ti ram
NDz clear polished ram housing
NDz-ANS clear polished LPR combo II
NDz RIP
NDz clear polished non-vision
SP cam-lock
AKA Sidewinder (2nd gen)
To many barrels to list
Hybrid shell, B2 board, rip-drive halo guts
Tank: Crossfire/Luxfur - Tank reg: SP micromax

Internals Weight: ?
LPR Pressure: ?
Inline Pressure: ?
Dwell Setting: 7.8ms
Consistency: average +/-3fps
Efficiency: 7 pods and a hopper off a 68/4500[full]

Comments:
__________________
PDXMark is offline   Reply With Quote
Old 03-10-2008, 10:15 PM #18
The_Godfather3
 
 
The_Godfather3's Avatar
 
Join Date: Jun 2007
Body Type and Color: stock (Lamorte) black
Frame: stock w/ Hybrid grips
Trigger:silver eclipse blade trigger
Board: WAS
Bolt and pin: NDZ white custom 5" equalizer
Hammer: brass (yeah I know)
Ram:stock
Ram Housing:stock
LPR: don't need one
Valve:stock
Ball Detents: eclipse fangz
Feedneck: check no rise
Regulator: Hybrid Sparta attached to NDZ 15 deg asa
Barrel: dye 12" boomstick
Hopper: EvoIII
Air Tank: 68 stubby (heavy as ****)

Internals Weight: **** if I know
LPR Pressure: N/A
Inline Pressure: 150 psi
Dwell Setting: ???
Consistency: I wouldn't own it if it wasn't +/-2
Efficiency: gas hog (no LPR, RIP, or 4500.....what do you expect)

Comments:
Pretty much stock looks but I swear its more consistent than a Tippmann 98. I could probably invest in more ups but if it isn't broke then why fix it? It has never given me problems since the day I bought it and its fast. Not as fast as some of yalls (I'm from Texas) but fast enough.
The_Godfather3 is offline   Reply With Quote
Old 03-11-2008, 04:47 PM #19
Chris Cole
One Case, No Kill
 
Chris Cole's Avatar
 
Join Date: Nov 2003
Location: 4th ring of Hades
 has been a member for 10 years
Chris Cole owns a Planet Eclipse Ego
Chris Cole supports Team VICIOUS
Chris Cole supports Bob Gurnsey
Body Type and Color: Stock/black
Frame: Stock
Trigger: Eclipse Blade (spring)
Board: WAS
Bolt and pin: Strange bolt/stock pin
Hammer: Eclipse Ti
Ram: Eclipse Ti
Ram Housing: Stock
LPR: Smart Parts
Valve: Stock
Ball Detents: Smart Parts
Feedneck: Check-it
Regulator: SFT Max-flo
Barrel: 14" Freak
Hopper: Halo B
Air Tank: 68/45 Centerflag or 68/3k ACI

Internals Weight:
LPR Pressure:
Inline Pressure: 200
Dwell Setting:
Consistency:
Efficiency: 9 pods and a Halo

Comments: will update with full info
__________________
I HEART BLOCK!
I may be retired, but the lousy aim is forever.
Chris Cole is offline   Reply With Quote
Old 03-11-2008, 05:20 PM #20
msonic
one case one kill
 
msonic's Avatar
 
Join Date: Oct 2004
Location: the sticks, michigan
Annual Supporting Member
msonic is a Mega Moderator
msonic is a Supporting Member
msonic is BST Legit
msonic donated to help Peyton Trent
msonic is one of the top 25 posters on PbNation
msonic is Immortal
Body Type and Color: Rat PB blue
Frame: Stock Rat
Trigger: NDZ wave
Board: WAS
Bolt and pin: Bandit shorty, NDZ titanium
Hammer: NDZ SS mid
Ram: NDZ slikshot
Ram Housing: NDZ HE
LPR: NDZ
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: NDZ norise
Regulator: CP shorty
Barrel: All American Freak
Hopper: RFd Pulse
Air Tank: 68/3000

Internals Weight:
LPR Pressure: 80-90psi
Inline Pressure: 120-130psi
Dwell Setting: 6.5
Consistency: +/- 4
Efficiency: 6pods and a hopper (68/3000)



Body Type and Color: Eclipse, Black to red
Frame: Iframev3
Trigger: DM4 CP
Board: WAS
Bolt and pin: Bandit shorty, NDZ Titanium
Hammer: SS Rathole
Ram: NDZ Slickshot
Ram Housing: NDZ HE
LPR: Function
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: CCM no rise
Regulator: AKA 2liter
Barrel: All American Freak
Hopper: Virtued Velocity
Air Tank: 68/3000

Internals Weight:
LPR Pressure: 80-90psi
Inline Pressure: 140psi
Dwell Setting: 6.5
Consistency: +/-3
Efficiency: yet to be determined
msonic is offline   Reply With Quote
Old 03-11-2008, 07:46 PM #21
xsn0man
I bleed burgundy and gold
 
xsn0man's Avatar
 
Join Date: Oct 2007
Location: Fairfax, VA
Body Type and Color: Gloss black, milled my self
Frame: IFrame
Trigger: Milkman
Board: WAS
Bolt and pin: Stubby Bandit bolt, SP Ti pin.
Hammer: Rathole SS
Ram: NDZ Slick Shot
Ram Housing: NDZ
LPR: Palmers Rock
Valve: RIP valve
Ball Detents: Hybrid
Feedneck: Q-lock
Regulator: Evil Detonator
Barrel: 14" Powerlyte Scepter
Hopper: Vlocity
Air Tank: Dye 68/4500

Internals Weight: 1040 grains
LPR Pressure: no gauge
Inline Pressure: 160 psi
Dwell Setting: 6ms
Consistency: pretty good +/- 2ish
Efficiency: 1000+

Comments: Efficiency is not where I want it, but its getting there.
__________________
RIP 21
Impulse Database
Originally Posted by Poopresearch
How many "looks like an shoebox shocker and karni had a baby" threads does it take to prove most paintballers are idiots?
IMP Parts Sale!

Last edited by xsn0man : 02-11-2009 at 06:17 PM.
xsn0man is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump