DM4 drop off

Dyeballer610 · 08-04-2007, 02:01 PM

my Dm4 is dropping off really bad. can anyone give me suggestion?

Clecko54 · 08-04-2007, 02:12 PM

Start with resetting the lpr and re chrono via hyper 2. Also dwell may be wrong so if you changed that setting from stock it could be problem, check it before rebuilding anything, and if the stock dwell and lpr don't do it rebuild the lpr completely

Dyeballer610 · 08-04-2007, 02:22 PM

could it be a noid problem cause that was leaking really bad

Astar · 08-04-2007, 03:45 PM

ewww leaks are icky...are you sure it is the noid tho? could be the front on/off, the bolt your hyper ect...

Dyeballer610 · 08-04-2007, 09:09 PM

to fix drop off do i raise or lower the dwell

shAdOwfOx032 · 08-04-2007, 10:24 PM

Bring everything back to stock.

fatboywoods · 08-04-2007, 10:41 PM

Stock:

Hyper=3
LPR=5
Dwell=18

^^I think. Not sure if they sticky'd that one thread.
And check for leaks...

rustyninja · 08-05-2007, 08:14 AM

its all in the stickies

Dyeballer610 · 08-05-2007, 09:28 AM

im new to pbnation. where are the stickies

rustyninja · 08-05-2007, 09:29 AM

big capitol letters at the top of the forum, one of the first few threads started ULTIMATE STICKY

Dyeballer610 · 08-05-2007, 12:22 PM

ok i fixed it thanx guys