[Walrus's Red Bucket]

Well i thought my dm5 had a blown noid, so i bought a brand new one, have all regs set at factory settings, and it is still leaking from the grip frame, changed the bolt sail and bolt o-rings and the leak is still there.
Any help/suggestions would be great

[suicidal stitch]

Did you lube the solenoid gasket before you put it in? All it needs a bit to make it look wet. Also make sure it's down nice and tight so it seals.


Sounds like it's probably the noid gasket, so start ruling that out, and if it still leaks let us know.

[Choiboy]

well i fixed my leak right near the trigger frame (near the trigger) by just changing some of the o-rings on the bolt. Also remember than some o-rings are bad to start with so try replacing the ones u replaced.

EDIT: try this... The ones u should replace are the second two 8s and the one 2 in the the top left corner. Also lube it well.