[Jesus Crust]

Originally Posted by nenkitsune

He didn't ask a stupid question. He asked how he should go about painting the plastic. You can't just say "uhh use paint *******" That, is a stupid thing to say. It's not like all paint is the same. There's acrylic base, latex base, oil based, should he use one brand or another, should he primer it, what kind of primer, etc etc.

Anyways, I'd say try using Krylon Fusion for plastics, you don't need to primer it, but make sure you do a good job of buffing out the scratches. Even the smallest scratch will show up. I painted a friends cellphone with Krylon fusion and it turned out great looking. It also helps if you bake it between coats with a low temperature in the oven. Not too long and not to high or else the plastic will get soft and deform.

Thanks for your help. I will try to do it today and see how it turns out.

Originally Posted by cockinmyhand

wow, well we've all probably assembled model cars before, that would be acrylic based and whattayaknow! it stuck to plastic.
latex paint sticks to just about everything and your krylon fusion is no different. a $.97 can of paint from wal-mart will do the job if you have enough skill to paint right.
paint is paint is paint is paint

GTFO of my thread, your not helping.

[ncpbkid123 (Banned)]

should have melted and molded it

[cockinmyhand]

you want some help? its cracked=its trash, unless you have a plastic welder melting it just covers the compromised plastic the crack is still there, it is still a weak spot that will break.

is that helpful? do you fell better?

[fs8frenzy]

Originally Posted by cockinmyhand

wow, well we've all probably assembled model cars before, that would be acrylic based and whattayaknow! it stuck to plastic.
latex paint sticks to just about everything and your krylon fusion is no different. a $.97 can of paint from wal-mart will do the job if you have enough skill to paint right.
paint is paint is paint is paint

go drink some latex paint, some oil based, and some water based paint, tell us wat the difference is

[Jesus Crust]

The crack is gone!!!

[cockinmyhand]

go drink some latex paint, some oil based, and some water based paint, tell us wat the difference is

you forgot lead based

The crack is gone!!!

just because you cant see it, doesnt mean its not still there

[shockrshootr23 (Banned)]

not to flame or anything....but if you ask me, it kinda seems like your a little into yourself on the shaving the trigger thing.

[Jesus Crust]

Well, how can I know for sure that it is gone? It disapeared and still has some major strentgh when I apply pressure.

[Jesus Crust]

Originally Posted by shockrshootr23

not to flame or anything....but if you ask me, it kinda seems like your a little into yourself on the shaving the trigger thing.

What do you mean and is it that I just don't get it but why would that be flaming?

If you mean I wasted my time on it, then you are correct, but I was bored.

[shockrshootr23 (Banned)]

i mean like its cool and all, but its not THAT cool. i mean, i shaved my trigger down to basically nothing too, but i didnt post about it. again, not to bring you down or start a fight.

[Jesus Crust]

lol, np, I jsut wanted to see if somwone liked it. lol, np, your not flaming in the leaset, lol

[shockrshootr23 (Banned)]

k cool. its nice work. probable better than i could do.

[LTBAKER]

Nice! Im not the best tinkerer in the world. But im just throwing this out there.
I dont know but can you rit dye it? Just something out of the blue lol

[Jesus Crust]

lol, thanks.

[commandercup]

line it with metal? looks awesome though, a great improvement on stock ion triggers

[AndrewKutsick]

Originally Posted by cockinmyhand

you want some help? its cracked=its trash, unless you have a plastic welder melting it just covers the compromised plastic the crack is still there, it is still a weak spot that will break.

is that helpful? do you fell better?

.... your a mistake. Anyway dude nice job on the trigger, looks really good. Try the fusion stuff, it works good on plastic. Anyway dont listen to any of these tools...^^.

[proto_m6]

i melted mine when i had an ion, and i still had it 7 guns later so i shaved it to fit my shocker

[stonebag]

Pictures don't work.

[Jesus Crust]

That is a first, refresh, as soon as I get back from washington, I will get some better newer pics.

[stonebag]

I see them now.

[Jesus Crust]

Okay, do you like it?