[oxygeneater]

I have a twister and I just got a 4500 tank and now it is leaking or it may have been before and I did not notice. it is coming from inbetween the trigger frame and the body. anyone have any sugg. before I start taking it apart. It is coming ont between the selinoid and the body I found that but the seal is still good.

[usagi_tetsu]

Then it's most likely your LPR (or AOC if you've still got stock) is set too high and needs to be turned down. I'd also drop some pressure from your HPR as well.

[shiftycastro30 (Banned)]

or you have a bad oring on the aoc / lpr adapter causing it to get straight high pressure.

[oxygeneater]

Thank you i will try those and see if it works

[Kansas Kaos]

OR it could be just a poor fitting o-ring that needs the teflon tape trick done to it so it will fit better........