DM4 Pred board possibly fried? - PbNation
Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Archived Thread - Cannot Edit  
Old 06-16-2007, 04:25 PM #1
Ladies man!
cp239's Avatar
Join Date: Jul 2005
Location: Your Girlfriend's House!
 has been a member for 10 years
DM4 Pred board possibly fried?

Awhile back I made a trip down to florida to play in a tournament. I was flying so I decided to just ship the gun down to myself. Before I left I did the usual check up on it. Everything was working great, however upon arrival the gun was acting a little wierd. It aired up with no leaks but when I tried to turn the gun on, the led would light up but just fade back off. I changed the battery but it didn't help. I took the gun to a shop and had it worked on. And heres the news I got. Apparently not only is the board fried but the solenoid is shot too. now I really don't understand, I put air through the gun, cycled it, turned it off, wrapped it, and put it in the box.I took it out of the box, and the board and noid were shot.

My question is how does this happen. What could have possibly happed to this gun during transit that would cause this much damage. And is there anything else I should try to do before ordering a new board and noid.
cp239 is offline  
Old Sponsored Links Remove Advertisement
Old 06-16-2007, 11:13 PM #2
Join Date: Sep 2003
 has been a member for 10 years
first check your dwell and make sure it is set to 18.....

it your dwell isn't set right it won't fire the noid.

let me know you can always email me @

(if there is an issue w/ the board i am sure i can take care of that)
DSandifer66 is offline  

Posting Rules
Forum Jump