T-board - PbNation
Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Archived Thread - Cannot Edit  
Old 06-03-2007, 10:04 PM #1
Capt'n Morgan
Registered Offender
Capt'n Morgan's Avatar
Join Date: Jul 2006
Location: T dot O
 has been a member for 10 years

Alright, I have a Wrath LTD with a T-board. I wish to know how to tune the dwell on it.

The only advice I have gotten is to crank the gun to around 270 fps (with a dwell of around 15ms, then when that is done lower the dwell till you reach the desired fps.) and use my dwell to adjust velocity, using the lpr for minor adjustments. Is this correct?

Any help is apreciated.
Thanks, Cpt. Morgan
Capt'n Morgan is offline  
Old Sponsored Links Remove Advertisement
Old 06-12-2007, 06:19 PM #2
matty07's Avatar
Join Date: Dec 2006
Location: mass
 has been a member for 10 years
set the velocity were you are gonna shot the marker

adjust the dwell in small increaments while shooting over a chrono until you get a constnt bps reading.

the dwell will need to be changed at different velocity settings
Pro Edition Karnivor
matty07 is offline  
Old 06-12-2007, 08:01 PM #3
android17ak47's Avatar
Join Date: Jun 2006
Location: jamestown n.y.
 has been a member for 10 years
Thats exacty how I fine tuned my wrath. I set the regs to shoot where I needed them to shoot, and then adjusted the dwell afterwards till I saw the best consistancy. Not like humphreys or parker solenoids which cannot be as easily fine tuned like this.
OLD Feedback87/0
NEW Feedback98/2
android17ak47 is offline  

Posting Rules
Forum Jump