Seems like there are some new questions. So I tried to answer them.
Legend FAQ Add-On 2.0
What barrel threading does the Legend take:
What is the recommended type of lubricant from Infinity:
light gun oil/Tri-flow/AKA gun oil
Do Legends take Intimidator eye/ wiring harnesses:
No, only the prototypes did.
[b]Do Legends take Intimidator detents[/ B]
Yes. There are many variations of the Timmy detents. Extra hard blue detents from Paintballkingdom are very popular especially being that the Legend comes with detent slots on the bolt predrilled. Here is a link to the blue detents.
How do you tell if you have a V1 or V2 board?
The V2 board says "V2" on the back.
What type of barbs does the Legend take?
10-32 threaded barbs (same as autocockers)
Should I lubricate the ram bumper?
Yes, with a small amount of oil.
How do I tell if I have an upgraded ram and bolt pin combo?
Compare to this picture which shows the new style combo.
Also, as of March 1, 2007 all Legends come stock with the upgraded combo.
What is the difference between the HK Legend and stock Legend?
-The HK legend uses an Ego style emitter and receiver as opposed to an Intimidator style emitter and receiver. Do not be confused though Ego or Timmy replacement eyes will NOT work in the Legend or HK Legend.
(Note the eyes for the HK Legend and stock Legend are not interchangable also)
How can I contact Infinity?
What type of grips does the Legend take?
.45 degree frame grips.
There is plenty of information about lubing the ram but how do I lube my CP reg?