Originally Posted by JtUsAGangsta
If you are holding the reg on the etek, you know the part that the macro line fits into,The elbow, and the part that it screws into on the reg that u can spin , right below that where that and the bottom piece of the reg meet, it leaks, please help if you know what im talkin about, fixed noid problem but need this fixed!
first you have to remove the elbow and then , separate the top part of the reg from the bottom. Pull the swivel up from the bottom part and you will find 2 o-rings. #16 nbr70. check for damage, 1 of them is damaged or both. You have to change it. When you replace them, put some Vaseline or oil on the o-rings and it will be much easier to push the swivel back on.