Wrath Help

skatin707 · 03-31-2006, 06:30 PM

dang im going to do this...and it works the same on an AR1? because mine is going to be at my house in about a half hour and i want to do this

Crazy Baller · 03-31-2006, 06:41 PM

yes it should work if u have the two prongs but make sure u change it back 2 semi b4 u turn ur gun off cause i just did it and i used up my battery having 2 much fun and turned it off half way through but all u have 2 do is turn it back on and change it 2 semi

skatin707 · 03-31-2006, 06:43 PM

oh...and what do these little jumper thingies look like and where can i get them?

jjdustr340 · 03-31-2006, 06:47 PM

Quote:

Originally Posted by skatin707

oh...and what do these little jumper thingies look like and where can i get them?

Small plastic rectangles.

If you have any computer parts laying around, there's usually some on old circuit boards or on the back of hard drives.
If you ask nicely at your local computer repair shop, they may just give you one, or I think you can buy them at Radio Shack for 2 for $1.

pman_64 · 03-31-2006, 06:49 PM

Well that's funny, cause all I did was push them together and soldered them together and I can change it from semi to full auto as fast as I can touch the button.

skatin707 · 03-31-2006, 06:51 PM

interesting pman, care to elaborate on how you did it?

ah.skeet · 03-31-2006, 07:30 PM

Instead of using a jumper to complete the connections between the prongs, he just bent them together

skatin707 · 03-31-2006, 07:55 PM

ooh..man i have a beefy leak inside my gun...i dont know whats up...

jayrad · 04-01-2006, 01:49 AM

This thread is as old as the hills...

a pb baller · 04-18-2006, 10:05 PM

so thier is no possible way to mess it up so u cant shoot at all
like i cant short hte board out or anything can i

majorneo · 06-06-2006, 04:24 PM

ppl i have a wrath LTD, i was wondering, does it have a ramping mode, i've heard that it had but i cant find it, could you please help me

seigfredm · 10-23-2006, 02:38 AM

Hi guys,

I just installed a micro jumper from my old dvd-rom drive and voilahhhh... I got full auto and can switch back and forth from auto to semi. Now can this actually damage my gun or any part of it in due time? don't know if it was designed to have that jumper for future upgrade (well maybe) or not but I just don't want to screw up my gun, I don't have money for another one in case I break it.

Thanks

The Inflicted · 10-23-2006, 08:07 AM

To my knowledge, no, having the full-auto jumper doesn't do any damage to the gun in any way. Of course, no gun likes being dry-fired at top speed in full-auto mode for extended periods of time, so once you've had your fun watching the shot counter spin up, try to go easy on the solenoid. Keep cleaning and oiling the gun like normal and it should perform fine for you.

cody_Williams_09 · 05-17-2007, 07:04 PM

Quote:

Originally Posted by reddragun5

if you have a wrath take the lcd off you will see right above the top switch their is two prongs thats where the jumper goes.
now the jumpers havent never been shipped to the states but you might be able to find them at an electronics store.
or you could put the lcd back on put the panel back on then take the panel off the other side. with the lcd on take off safe "with no air of course" then take a small screw driver or something small and hold to the back side of the led board where the two prongs are, and push the top switch once it should chainge to auto.
i wouldnt recomend doing this because you only need to jump those two prongs if you touch more than those two at the same time it could damage the pc board.

Will This Also Work With The Slayer???

pro sniper15 · 09-25-2007, 06:43 PM

what about the Diablo wrath before that one, i think is is gen 5.

-Cro$$fire- · 03-18-2008, 05:10 PM

ok guys is it safe to use tin foil for this "Procedure" lol

EDIT**** crap sorry guys i posted in the way wrong forum, lol i was looking at the jumper mod forum and clicked a link then accidentally posted here >.<

Evolution36 · 03-20-2008, 06:55 PM

yes crossfire just make sure the tin foil stays on there while you're playing or you could mess up the board if it falls off and the board is on.

DanTMWTMP · 03-20-2008, 07:09 PM

umm... why would anyone not use those jumpers you find on computers or even any electronics store?

Don't bend the pins on the board, and do not use foil. It's not a permanent fixture, and you run the risk of damaging the board. Jumpers are cheaper. Just use those, and nothing else.

godofsk8ers · 06-19-2008, 08:45 AM

hey if you dont like the seting and you take of the jumper make sure u put it back in semi before doing so or you will be stuck on auto and insted of using a jumper plug you can use tin foil it works just the same

Robbieisbobert · 06-19-2008, 12:03 PM

Please, let the thread R.I.P.

micahspike · 06-19-2008, 12:23 PM

Holy dead.....You all know the drill. Let it die.