question about power source for shroudless rainmakers?

Gotenks · 01-02-2002, 12:47 PM

I've seen people have the little battery box on the bottom of the grip, or the power source from the hopper, but ive also seen rainmakers of yours that dont have either. on those, where is your power source coming from?

i dont know if you guys did this, but its an idea.

in 12 volt revolutions, you might think theres no room, but behind the 2 batterys, in the back of the loader, there is a reasonable space to put a circuit board. if the rainmaker one wont fit, you can but a morlock from KM2, which fits for sure, and will work witht he rainmaker. then the grip could be used for the battery.

ScottQ · 01-02-2002, 01:45 PM

good idea, but what if you loaders dies in a middle of a tournament, and you need to use someone elses loader.

Gotenks · 01-02-2002, 02:04 PM

ya that would be a problem... but if you have it really simple, like dont have it attached with screws, but have it just sitting in there, and have a disconnectable wire, well, just get that other loader, make a small hole for the wire, and tada! switched... i dunno..

but hey i saw your rainmaker... that ano is so tight!!! but what is your power source?

SGT BiGGiE · 01-02-2002, 03:01 PM

if i'm not mistaken scott has his battery on his drop forward,and what exactly is the morlock?

Gotenks · 01-02-2002, 05:40 PM

its a universal chip, that can be programmed to control a single solenoid marker open bolt marker, to a closed bolt 2 solenoid marker.

but the thing about this chip is that... it is extremely compact, if you put 3 pennys in a row by it, the 3 pennys will probably be 2 times bigger.

SGT BiGGiE · 01-02-2002, 06:27 PM

so it would be able to control any open or closed bolt electro marker?,what kind of fire modes does it have?

ScottQ · 01-02-2002, 07:39 PM

These the same boards that the crazy Al Morlock made? I wouldnt touch those with a 10 yard stick.

Gotenks · 01-02-2002, 08:51 PM

whos al morlock???

these are made by CURT of KM2, he is a respectable person and that is a very respectable company. they make the gale force board many of you have in your rainmakers.

as for firing modes, its programmable for just about anything, bursts, auto, and bps is adjustable too.

its a crazy board for its size.

Gotenks · 01-02-2002, 08:53 PM

heres a link

http://www.exarin.com/products/morlockman.html

Gotenks · 01-02-2002, 09:01 PM

program it, since it only has 2 dip switches.

ScottQ · 01-03-2002, 11:51 PM

Al Morllock or whatever owned Porno Paintball. He made the A&P circuit board and other RM products.

Gotenks · 01-04-2002, 12:13 AM

nonononno

not that scumbag al

isnt he in jail or something???

www.exarin.com

THIS IS NOT AL MORLOCK!!!

but they make a very good board called the morlock. hope there is no more confusion.

Kevmaster · 01-04-2002, 12:59 PM

as for the morlock setup, you use the trigger to set things up after you use the dipswithes to signal single or dobule solenoid and eye on-off

Kevmaster · 01-04-2002, 01:02 PM

oh, yeh, hre is the pic you tried to show, but with it showing up this time

Gotenks · 01-04-2002, 04:58 PM

thanks a lot kevmaster

i wish i knew how to put the picture up, darn computers

Kevmaster · 01-04-2002, 09:58 PM

its not your fault, the problem lies in that the servers you use to host the pics dont allow off site linking. i pay for my server space and so they let me do whatever i like

lol!

Kevmaster · 01-04-2002, 10:05 PM

eh, i lied

the dips are just for tourny lock

ScottQ · 01-06-2002, 10:42 PM

I wonder if you could fit a battery AND board in the gripframe...ot put the board in the space between the grip and gun..like a shocker.