today i was at danger zone out door in Washington
and like it was leaking but i got everything fixed.
but then this one problem was air was going through and everything
but like for an odd reason the bolt wasnt moving, and it wouldnt shoot but
sometimes the bolt just stays forwards which was kind of awkward but yeah we fixed that then
the last problem that i didnt get time to fix was i was shooting hooott
the field required your fps to be 285
and i was shooting 320-370 and the problem was i couldnt lower it
so any suggestions what i should do?
yes i lubed and clean the Lpr
new orings
and the pressure said 500...
for an odd reason
its either i 400-500ish
when i went 400 the air couldnt recharge that fast enough
but at 500 it was working fine but was shooting way too hot
It could be your reg, if u can, try a different reg(HPR) and see if that is it. Also idk its just a guess but put a fresh new name brand battery in there too.
Your hp reg was at 500!!!!! It needs to be 250-300 otherwise you will blow your noid or worse! And thats why you were shooting way hott your pressure was almost twice more than it should be!
Bottom out regs, set hp to 250, adjust lp until you are shooting desired speed. If its not recharging fast enough take apart your hp reg and clean it out and lube it. If its dry it wont work correctly.
Please contact customer service at your convenience: service@dangerouspower.com. From the sound of your issue, you do not have a factory c-clip in place. This can potentially cause problems you are describing: shooting hot and leaks. From our experience, we can pinpoint a very high possibility that your marker was being overpressurized beyond factory specs. Fusions are NOT designed to shoot at the velocity you've described.
and DP STILL will fix your gun after you 1) did not read the manual 2) bound your fusion so it can not resist 3)raped your fusion 3) cut off its limbs 4) threw it out in the trash 5) left it to die
and DP STILL will fix your gun after you 1) did not read the manual 2) bound your fusion so it can not resist 3)raped your fusion 4) cut off its limbs 5) threw it out in the trash 6) left it to die
It needs to be 250-300 otherwise you will blow your noid or worse! And thats why you were shooting way hott your pressure was almost twice more than it should be! 
