[KLyMaXx]

I have two vertical regs, one from an ego 05, and another one from an ego 06.
Both seem to be the same, except for the 06 reg which seems to be a little bit longer, any other differences?
and my main question, what its the pressure output of these HPR, o-500 psi? 0-400 psi? I have to set it to around 210~240 psi and I dont have a gauge to messure it, anyone knoes how many turns in from flush is that? or turns from 0 psi? is it the same in both regs?
THanks

P.D. Are the pistons interchangeable between these two regs?

[DSBShocka101]

the only difference is that the 06 is milled diff....im not really sure what the output is...put egos normally run around 4 turns in from flush...and yes the pistons are interchangable

[KLyMaXx]

thanks, I have a Quest and Im messing with the regs up and down, and those two spare ego regs, seem to do better than the zerodrop on the quest.

[big_scott]

Just start with it turned all the way in and slowly adjust it out until you reach the velocity you want. No guage needed.