Originally Posted by deofol560
ok so I was thinking of the Evil respirator not the detonator I found one for cheap brand new but I was told it was only for the timmy what is the difference between the two?
The Detonator and the Respirator are two entirely different kinds of parts. The Detonator is an inline input regulator, is intended to output pressures anywhere from 100-700psi and will fit any gun with a standard vertical ASA. The Respirator, on the other hand, is an LPR, and typically feeds out 50-200 psi. Also, beceause an LPR is a part specific to a gun's design it has to be designed specifically for a particular gun. There are evil respirators out for both the Impulse and the Intimidator, but sadly neither will fit the Wrath because the fitting for the LPR is very different, even though on all three guns the part is located under the barrel.
In fact, there aren't ANY aftermarket low pressure regulators currently available for the Wrath, or the Wrath LTD. Not a problem in my opinion, because the Wrath's LPR is essentially a direct copy of the Palmer microrock regulator, a top-end LPR for autocockers. There's really no reason to replace it in the first place.