Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 04-04-2007, 12:28 PM #1
brmurray
 
 
brmurray's Avatar
 
Join Date: Feb 2007
Need some advice

item is WG-65.

Problem, very low velocity and will not recock.

48-3000 airsource with 3000psi

everything is lubed well, no leaks

Give me your advice if you know this thing!

Thanks!
brmurray is offline  
Old 04-04-2007, 01:23 PM #2
devilmountainsports
NightStalkers
 
devilmountainsports's Avatar
 
Join Date: Apr 2004
 has been a member for 10 years
Replace the orings on the bolt or buy a composite bolt.
__________________
Night Stalkers Scenario Paintball -Sponsored by Nobody
Please do not contact us for sponsorships we are not interested.

I no longer own DMSPaintball.com. Call the store directly at 925-608-3319 for all your questions.
devilmountainsports is offline  
Old 04-04-2007, 04:03 PM #3
brmurray
 
 
brmurray's Avatar
 
Join Date: Feb 2007
Quote:
Originally Posted by devilmountainsports View Post
Replace the orings on the bolt or buy a composite bolt.
bolt slides easily. replaced orings. don't think that is my problem.
brmurray is offline  
Old 04-04-2007, 04:35 PM #4
devilmountainsports
NightStalkers
 
devilmountainsports's Avatar
 
Join Date: Apr 2004
 has been a member for 10 years
That is your problem
__________________
Night Stalkers Scenario Paintball -Sponsored by Nobody
Please do not contact us for sponsorships we are not interested.

I no longer own DMSPaintball.com. Call the store directly at 925-608-3319 for all your questions.
devilmountainsports is offline  
Old 04-05-2007, 10:42 AM #5
georgeyew
 
 
Join Date: Mar 2007
Location: Virginia
georgeyew supports Pev's Paintball
What is the pressure output on the HPA tank? The WG65 needs at least 850 psi to work. BTW, the 3000 psi on the tank does not mean the put pressure is 3000 psi.
georgeyew is offline  
Old 04-09-2007, 09:28 PM #6
morgan-sniper (Banned)
 
 
Join Date: Apr 2007
hmmm, check to see if the valve retaining pin is in, if it isnt it wont recock, its a pin that goes straight through the gun that sits right above the trigger frame
morgan-sniper is offline  
Old 04-10-2007, 07:32 AM #7
suicidal stitch
 
 
suicidal stitch's Avatar
 
Join Date: Jul 2006
Location: SoMich
^^^That's a cupseal, and has nothing to do with recocking issues.

Try replacing your striker o-ring as well, even if it doesn't look damaged, give it a try. 9 times out of 10 when my Zeus or WS-66 won't recock is due to a striker o-ring being bad.
__________________

UL'd Black DM5
Pink/Black PM5

I want clear DM5 eye covers, PM me if you want black covers.
suicidal stitch is offline  
Old 04-10-2007, 08:09 AM #8
morgan-sniper (Banned)
 
 
Join Date: Apr 2007
not the cupseal, there is a pin that goes completely through the gun, you dont even have to take apart the gun, it just makes sure that your striker doesnt go too far, spyders have them too
morgan-sniper is offline  
Old 04-10-2007, 09:52 AM #9
devilmountainsports
NightStalkers
 
devilmountainsports's Avatar
 
Join Date: Apr 2004
 has been a member for 10 years
It still has nothing to do with recocking issues. It is an oring on the bolt or striker. If the gun goes full auto then it is a worn sear.
__________________
Night Stalkers Scenario Paintball -Sponsored by Nobody
Please do not contact us for sponsorships we are not interested.

I no longer own DMSPaintball.com. Call the store directly at 925-608-3319 for all your questions.
devilmountainsports is offline  
 




Posting Rules
Forum Jump