too lazy to write up stuff so heres the ebay descriptions:
Up for auction is a used HPI Nitro MT 4x4 nitro stadium truck. This truck has led me to 1st place spot of the 2002 HPI Challenge Rs4 truck class, among other off-road and parking lot races around southern california. This truck runs great and is FAST. Many extras are included so you get alot for what you pay. The truck's chassis is a bit scratched up on the bottom, but thats common with any used R/C. All the suspension arms are the aftermarket graphite type. The stock wheels are still being used and an extra set of street-tires mounted on HPI Super Star deep-offset rims are included. The engine installed is a Trinity/Picco .12 1.25hp racing engine with an HPI lightweight aftermarket flywheel installed. This flywheel lets this engine idle well and rev to max RPMs incredibly fast, so fast that you may need to regear it to prevent the truck from hitting top speed in about 15feet like it does right now. This is a bump start engine, so you need a starter box to turn it on. A fail safe is also included because nobody wants a high-speed crash. There is also an HPI Slipper-clutch installed so if you go jumping with this truck, you wont strip the spur gear so easily as i have done in the past (until i installed the slipper clutch). A Team Associated tuned pipe is also included as well as the standard HPI Airtronics radio which still works great.
3 bodies (1 in decent condition, 2 pretty beat up)
tool-box with extra glow plugs (some used), extra exhaust pipes, air filters, and other misc. stuff
instruction manual for both the picco engine and the Nitro MT itself
the original Nitro Star .15fe engine. It is gummed up right now, but was working when i removed it from the truck. Leave some WD-40 in it overnight or after-run oil and crank it and it should come unstuck.
Stock spring kit
aftermarket springs (currently installed)
Street tires mounted on HPI Super Star Deep Offset rims
and i think thats it. The truck overall is in fine running condition and you should be able to start it and tear up the streets providing you have a starter box to do that with. The .12 picco engine was $125 brand new so keep that in mind when considering this truck (as well as the included radio and all the extras like the slipper clutch and flywheel).
all items are sold as-is and shipped via DHL ground, make sure to check out my other auctions!
Im the one with the red shirt/black jacket. Holding the 1st place truck.
Up for auction is a used Ofna OB4 International on-road belt drive r/c car. This thing has a woven carbon fiber chassis and uppderdeck, fully adjustable pillow-ball suspension (something seen more in nitro on-road than electric), and an efficient 2-belt drive that is all the rage currently. The belt drive on this system is comparable to the HPI Pro2, and, more recently, the very popular and fast Hot Bodies Cyclone. The front axles are CVA joints where the rear are standard dogbone types. There are swaybars all the way around and the gear system is 64-pitch. This a 4-wheel drive vehicle that excepts standard stick packs (and is currently set up for them) or can be setup to accept saddle-packs and standard side-by-side packs. This car won me quite a few races at local circuits (such as SoCal Raceway of huntington beach) and was a great performer until i replaced it with a Tc3 which i got for an unbeatable price back then. The shocks have anodized purple caps and are threaded body types. Droop is adjustable and so is stiffness (by means of sway bars too). This car NEVER broke. I cant say the same for my tc3, which was odd considering this was my learner car for onroad. The only thing that ever broke was an easily replaceable pin that holds the wheel on to the hex nut. Thats all. This is one strong r/c and is fast. No doubt that with proper tuning this can still keep up with the powerhouses of today. Heck, the Cyclone uses the same dual belt design! Just google it for yourself!
used foam wheels
3 beat up bodies, all can serve their purpose once more with a little hot glue though
Ob4 stickers and velcro straps
1) $300 OBO
+ 30 for shipping
2) $85 OBO
+ 10 for shipping SOLD