[WhoLostThePuck]

I don't mean to be a nuisance, but when it comes to trigger, is there anyway i can move the trigger on my spyder back, so it can be fired easier? Or, be made mor sensitive?

[PBman17]

Which gun is it exactly?

Most electro spyders pull's can be shortened by using an allen wrench in the hole above the trigger area.

[martix_agent]

or screwing out that screw on top of the trigger you see when you take the frame off.

[WhoLostThePuck]

It is a Spyder TL-R, non electronic.

[beef-is-good]

no, it's mecahnical, so you can't do anything about it.

[WhoLostThePuck]

Ok, thanks anyways.

[poomunj]

yes you can but it will take mucho modification

[autococker06]

not really.
all that you would need to do to make the trigger pull shorter
is take the frame off, and look ath the top of the trigger, there will be a little part extending over the spring that pushes the trigger back into place

now theres gunna be a flat area on the top of this piece, so take a timy piece of cardboard, or some other thin matteral, and glue it on there,

let it dry, put the frame back on the gun, scrwe everything in and bam , you have a short trigger pull, there are ways to make it even shorter, and lighter, but i dont feel like typing

[trenches]

number one thing u can do is read the manuel if you have one. if not, look at the trigger, and look for places that accept allen wrenches, those are the usual places you can move a trigger around. good luck

[proto baller 69]

its possible but doesnt do anything for u, its not electronic so it doesnt walk faster or anyhint along those lines... dont risk hurting ur marker and voiding the warrenty... i suggest getting an electonic marker uf u want to shoot faster..