I frequently get asked "what are the pros and cons of a legend"... so i thought i would make this.
If you cant get a chance to shoot a legend, i suggest shooting these guns to get the closest mix from my legend.
Light (8in long, 7in high, thought i would throw that in)
Noid Wires Are a Bit Weak
Some People Hate On the Triggers
Hard to Find
BIT Loud (if you are used to dm's)
Little After Market Parts
Frequency of Cleaning:
Originally Posted by InfinityPaintball
We realize that many of our customers have pulled off the solenoid wire while taking the Legend apart. We are working to make this more user friendly.
In the mean time.
Don't take your Legend apart!!
To clean the gun, you don't need to separate the body from the frame!
Clean your upper bolt chamber by removing the bolt and run a clean battle swab through it.
DO NOT USE LUBE OR OIL IN THE UPPER BOLT CHAMBER!
To Clean the Ram and lower chamber, simply remove the rear grip frame screw.
DO NOT REMOVE THE FRONT GRIP FRAME SCREW!
Then pull the ram out of the back of the body. Clean the chamber with a clean battle swab. Clean and lube the hammer O-ring.
Put the Ram back in the body and then insert the rear grip frame screw. Make sure the hole in the ram lines up with the grip frame screw!
Thats it. Don't take anything else apart unless you have a problem like a leak or broken ball-detent.
I hope this helps.
That's about it, if you have anything else to add feel free.