Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-02-2007, 11:29 AM #799
Wf_tippmann_
HOLY **** EVERYBODY RUN!!
 
Wf_tippmann_'s Avatar
 
Join Date: Jul 2005
Location: West Fargo, ND
i had the board in my old hopper with all the mods for any about 2 second. then i took it out because i didnt like it with all the mods. how would it get fried? could somone show me a picture of whats fied. thanks!!
__________________
FEEDBACK +44/-0
Official pump ballers club # 4

Fargo United
Wf_tippmann_ is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 03-02-2007, 12:12 PM #800
LaxHawk
THE Anti-Agg
 
LaxHawk's Avatar
 
Join Date: Sep 2005
Location: PA
update on my resistor staple mod thing...

the 270 ohm resistor eventually burned out my motor after about 18 battery packs through it. But good news is out there, I found some specs for the motor in the stock halo, and if you run a 660 ohm resistor you should have no problems. I put on in my halo with a new motor and it ran around 25-26 bps.
__________________
Feedback +23/-0
LaxHawk is offline   Reply With Quote
Old 03-02-2007, 04:01 PM #801
madkiddo115 (Banned)
 
Join Date: Jan 2007
^^^^lmao^^^ up!!
madkiddo115 is offline   Reply With Quote
Old 03-03-2007, 04:36 PM #802
mtbrdude
**** Smart Parts
 
mtbrdude's Avatar
 
Join Date: Aug 2003
Location: Kitchener, ON, Canada
 has been a member for 10 years
mtbrdude donated to help Peyton Trent
does the v35 board have an anti-jam like the z code does?
__________________
Freestyle Tech Site
Feedback
mtbrdude is offline   Reply With Quote
Old 03-03-2007, 04:40 PM #803
crownsk9er (Banned)
 
Join Date: Jun 2006
yes
crownsk9er is offline   Reply With Quote
Old 03-06-2007, 02:39 AM #804
m_dogg2021
El Rey Del La Halo!!
 
m_dogg2021's Avatar
 
Join Date: Nov 2004
Location: Welches, OR 97067
Annual Supporting Member
m_dogg2021 is a Supporting Member
 has been a member for 10 years
Vegeta_ss4 - bad connection AKA the boards pins are bent. Or in the connector the sleeve isnt crimped so its not making a good connecting with the board. The other issue could be just low batteries (the HD2 will only make your halo jam if the voltage gos under 7.5V

Wf_tippmann_ - lol 1st page 1st post.
__________________
100% POSITIVE FEEDBACK PBN 128+ 0- ____ e-bay 72+ 0-


.

IF YOU SHIP ANY PB PART WITH A NORMAL ENVELOPE I WILL KILL YOU.
m_dogg2021 is offline   Reply With Quote
Old 03-06-2007, 02:49 AM #805
CanfieldOO7
Dirtbag
 
CanfieldOO7's Avatar
 
Join Date: Apr 2005
Location: 262 Wisconsin
CanfieldOO7 is a Supporting Member
CanfieldOO7 helped look for balloons
CanfieldOO7 is playing at Living Legends III
CanfieldOO7 is for the Gunfight
CanfieldOO7 is reppin' sidebar 4 life
CanfieldOO7 plays in the APPA D4 division
I found a problem with the Speedwheel and Bone combo. After god knows how many cases(prolly bout 8) @ LAO this weekend my hopper was still feeding strong in the semis and once i hit the last ball in my hopper it popcorned and cracked the shell. So i guess you could say that combo works too well.

We ended up rolling through to get 1st though, all my paint was shot off of one charge. And the new Reloader B2 boards can handle a Bone no problem unlike the old reloader boards.
__________________
We cant stop here, this is bat country.
PbN+OC=Ban
There is a time for war - Ecclesiastes 3:8
PbN
Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."

Last edited by CanfieldOO7 : 03-06-2007 at 02:54 AM.
CanfieldOO7 is offline   Reply With Quote
Old 03-06-2007, 09:35 PM #806
DyePrecision
Window - Shoppa
 
Join Date: Jul 2006
Location: four one three
hey guys i home made my self a 9v mod does anyone know it it will burn out the motor and whats the difference between just hooking up just one 9v to the mail 9v connector can someone help me out lmk so i dont screw my self over
DyePrecision is offline   Reply With Quote
Old 03-06-2007, 10:15 PM #807
CrazyPimp05
 
 
Join Date: Nov 2006
do you know how to mod a membrane pad to be the on/off switch? im interested in doing this but have no idea how to go about it. lemme know
__________________
[center] John
Free Agent!
CrazyPimp05 is offline   Reply With Quote
Old 03-06-2007, 10:21 PM #808
CanfieldOO7
Dirtbag
 
CanfieldOO7's Avatar
 
Join Date: Apr 2005
Location: 262 Wisconsin
CanfieldOO7 is a Supporting Member
CanfieldOO7 helped look for balloons
CanfieldOO7 is playing at Living Legends III
CanfieldOO7 is for the Gunfight
CanfieldOO7 is reppin' sidebar 4 life
CanfieldOO7 plays in the APPA D4 division
Its possible, but whyd youd want a membrane pad is beyond me. All it would require is you plugging in wires into the pads connectors and soldering the proper points on the board(by the on/off switch).
__________________
We cant stop here, this is bat country.
PbN+OC=Ban
There is a time for war - Ecclesiastes 3:8
PbN
Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."
CanfieldOO7 is offline   Reply With Quote
Old 03-06-2007, 10:27 PM #809
CrazyPimp05
 
 
Join Date: Nov 2006
Quote:
Originally Posted by CanfieldOO7 View Post
Its possible, but whyd youd want a membrane pad is beyond me. All it would require is you plugging in wires into the pads connectors and soldering the proper points on the board(by the on/off switch).
because i hate my on/off and dont want an "X" button
__________________
[center] John
Free Agent!
CrazyPimp05 is offline   Reply With Quote
Old 03-06-2007, 10:39 PM #810
DyePrecision
Window - Shoppa
 
Join Date: Jul 2006
Location: four one three
lol what about mine will a 9v mod burn out your motor?
DyePrecision is offline   Reply With Quote
Old 03-07-2007, 03:00 AM #811
m_dogg2021
El Rey Del La Halo!!
 
m_dogg2021's Avatar
 
Join Date: Nov 2004
Location: Welches, OR 97067
Annual Supporting Member
m_dogg2021 is a Supporting Member
 has been a member for 10 years
DyePrecision - eh not quite sure what your trying to aks but ill give it my best. Not the 9V mod wont fri your board (unless your a moron and wire it wrong) but if you just follow my instrutions in the post you should be fine. Now for the part of your question that i'm not quite sure what your want to know, but I think I can guess. I think your trying to ask if you can run the 9v batteries in series will fri the board? If so then YES it will fri the board because the board will only take at max 9.6V and if you run the 9V in series it will run 18v to the board and thus frying it. If thats to hard to under stand then I hope this will help: http://www.zbattery.com/seriesparallel.html
__________________
100% POSITIVE FEEDBACK PBN 128+ 0- ____ e-bay 72+ 0-


.

IF YOU SHIP ANY PB PART WITH A NORMAL ENVELOPE I WILL KILL YOU.
m_dogg2021 is offline   Reply With Quote
Old 03-07-2007, 09:24 AM #812
s0uls
Team Unity
 
s0uls's Avatar
 
Join Date: Jul 2005
Location: Bs. As. - Argentina
i just want to check one thing, halo v35/reloader b2 shell wont work with a speed feed v2 right ?
__________________
/-/ FEP OG Quest /-/ CP Shorty /-/ Gold Member Bolt /-/ Empire Nano On-Off /-/ Ape Rampage Board /-/
/-/ Gangstar Vlocity Jr /-/ Crossfire 70/4500 /-/
Proudly Sponsored by Montypaintballs
www.abyss11.com
My (new system) FeedBack
My FeedBack
[HK]HK Stickers HK Sticker HK Stickers HK Stickers[/HK]
s0uls is offline   Reply With Quote
Old 03-07-2007, 01:18 PM #813
DyePrecision
Window - Shoppa
 
Join Date: Jul 2006
Location: four one three
Quote:
Originally Posted by m_dogg2021 View Post
DyePrecision - eh not quite sure what your trying to aks but ill give it my best. Not the 9V mod wont fri your board (unless your a moron and wire it wrong) but if you just follow my instrutions in the post you should be fine. Now for the part of your question that i'm not quite sure what your want to know, but I think I can guess. I think your trying to ask if you can run the 9v batteries in series will fri the board? If so then YES it will fri the board because the board will only take at max 9.6V and if you run the 9V in series it will run 18v to the board and thus frying it. If thats to hard to under stand then I hope this will help: http://www.zbattery.com/seriesparallel.html
thank you that what i wanted to know i just didnt want to hook it up and then screw myself over hers a pic of my 9v mod does it look decent lmk. comments are appreicated

DyePrecision is offline   Reply With Quote
Old 03-07-2007, 01:42 PM #814
CanfieldOO7
Dirtbag
 
CanfieldOO7's Avatar
 
Join Date: Apr 2005
Location: 262 Wisconsin
CanfieldOO7 is a Supporting Member
CanfieldOO7 helped look for balloons
CanfieldOO7 is playing at Living Legends III
CanfieldOO7 is for the Gunfight
CanfieldOO7 is reppin' sidebar 4 life
CanfieldOO7 plays in the APPA D4 division
Quote:
Originally Posted by s0uls View Post
i just want to check one thing, halo v35/reloader b2 shell wont work with a speed feed v2 right ?
Yes it will. . .
__________________
We cant stop here, this is bat country.
PbN+OC=Ban
There is a time for war - Ecclesiastes 3:8
PbN
Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."
CanfieldOO7 is offline   Reply With Quote
Old 03-07-2007, 11:27 PM #815
s0uls
Team Unity
 
s0uls's Avatar
 
Join Date: Jul 2005
Location: Bs. As. - Argentina
Quote:
Originally Posted by CanfieldOO7 View Post
Yes it will. . .
then how mine is not fitting? ill get a camera and post some pics tomorrow.
__________________
/-/ FEP OG Quest /-/ CP Shorty /-/ Gold Member Bolt /-/ Empire Nano On-Off /-/ Ape Rampage Board /-/
/-/ Gangstar Vlocity Jr /-/ Crossfire 70/4500 /-/
Proudly Sponsored by Montypaintballs
www.abyss11.com
My (new system) FeedBack
My FeedBack
[HK]HK Stickers HK Sticker HK Stickers HK Stickers[/HK]
s0uls is offline   Reply With Quote
Old 03-08-2007, 12:12 AM #816
CanfieldOO7
Dirtbag
 
CanfieldOO7's Avatar
 
Join Date: Apr 2005
Location: 262 Wisconsin
CanfieldOO7 is a Supporting Member
CanfieldOO7 helped look for balloons
CanfieldOO7 is playing at Living Legends III
CanfieldOO7 is for the Gunfight
CanfieldOO7 is reppin' sidebar 4 life
CanfieldOO7 plays in the APPA D4 division
The speedfeed doesnt fit as in its too big or too small? Call up whoever makes em and request a replacement. I picked up 3 speedfeeds at LA(from the sidelines because they fell off of peoples hoppers) and they all fit my suicide shells and my teammates B2(empire) shells just fine.
__________________
We cant stop here, this is bat country.
PbN+OC=Ban
There is a time for war - Ecclesiastes 3:8
PbN
Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."
CanfieldOO7 is offline   Reply With Quote
Old 03-08-2007, 03:09 AM #817
m_dogg2021
El Rey Del La Halo!!
 
m_dogg2021's Avatar
 
Join Date: Nov 2004
Location: Welches, OR 97067
Annual Supporting Member
m_dogg2021 is a Supporting Member
 has been a member for 10 years
DyePrecision - - doesnt look half bad infact I think it will work just fine for you
__________________
100% POSITIVE FEEDBACK PBN 128+ 0- ____ e-bay 72+ 0-


.

IF YOU SHIP ANY PB PART WITH A NORMAL ENVELOPE I WILL KILL YOU.
m_dogg2021 is offline   Reply With Quote
Old 03-08-2007, 10:48 AM #818
DyePrecision
Window - Shoppa
 
Join Date: Jul 2006
Location: four one three
Quote:
Originally Posted by m_dogg2021 View Post
DyePrecision - - doesnt look half bad infact I think it will work just fine for you
cool thanks
DyePrecision is offline   Reply With Quote
Old 03-08-2007, 08:50 PM #819
mtbrdude
**** Smart Parts
 
mtbrdude's Avatar
 
Join Date: Aug 2003
Location: Kitchener, ON, Canada
 has been a member for 10 years
mtbrdude donated to help Peyton Trent
2 x9v vs. 6 x AA?

which is better for speed and which lasts longer?
__________________
Freestyle Tech Site
Feedback
mtbrdude is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump