Frequency of Cleaning
We realize that many of our customers have pulled off the solenoid wire while taking the Legend apart. We are working to make this more user friendly.
In the mean time.
Don't take your Legend apart!!
To clean the gun, you don't need to separate the body from the frame!
Clean your upper bolt chamber by removing the bolt and run a clean battle swab through it.
DO NOT USE LUBE OR OIL IN THE UPPER BOLT CHAMBER!
To Clean the Ram and lower chamber, simply remove the rear grip frame screw.
DO NOT REMOVE THE FRONT GRIP FRAME SCREW!
Then pull the ram out of the back of the body. Clean the chamber with a clean battle swab. Clean and lube the hammer O-ring.
Put the Ram back in the body and then insert the rear grip frame screw. Make sure the hole in the ram lines up with the grip frame screw!
Thats it. Don't take anything else apart unless you have a problem like a leak or broken ball-detent.
I hope this helps.