[dyeboy]

I'am putting togethor an o ring kit for my remains does anybody have th eo rings sizes. Thanks.

[rluna]

FYI, I found this by searching the forum.....

Remains
Lpr
- Set screw 1/4/-28
- cap oring size 10
- Piston oring 1.5 Metric

LPR Body (what the piston slides into and what the LPR screws into)
- inside oring - size 10
- outside oring - 2 x size 15
- Vert Asa - size 13
- Valve - 2 x size 15

Interceptors
Lpr Body
- Quad Ring Size 15
- Quad Ring size 18 or regular size 18 both work
Front Block
- special size 14x2
- Valve 2 x Size 15

HPR piston upper half behind pin
- size 6 or 7 90 durum both work

HPR piston Lower half
- size 3/32x18 90 durum

Ram and solinoid orings are not listed because rams and solinoids are not considered user serviceable if your ram or solinoid goes out you need to contact alienpb.

[pacasowithagun]

k thanks

[Exit Wounds]

I suggest that the oring list be added to the F.A.Q.

[pacasowithagun]

^^^probably a good idea

[rluna]

Done.

[RedAkuma]

whew makes my life a bit easier

[Exit Wounds]

^haha. I can never find this info when someone asks for it, and feel bad that your work has gone to waste. Fortunately that won't happen any more.