[Movie Guy]

Like Inflicted said, pics should be up again soon as Doc is working on getting everything back up and settled with his ISP.

Supposedly he's going to have some nice videos of it working....with a race grip....as soon as he gets it up, I'm sure someone here will post it here.

MG

[maskedpenisfromvenus]

only 1 ram. hello gas hog sr. gas hog of cockersville!

[notcockershooter2k3]

it wouldnt be that much of a gas hog they already have doubled rammed cockers

[The Inflicted]

Adding a second ram would do nothing to help efficiency. All it would do is increase the total volume of the ram cylinders that would have to be filled on the stroke, which might slightly lower the needed pneumatic pressure, but NOT lowering the effective force exerted by the ram(s) on the backblock. If anything, using two rams is less efficient because of the added resistance in the ram cylinders themselves. Besides, when you consider the amount of gas this gun expends on each double-ended shot in the bolt tubes, the gas used on the pneumatic cycle is negligable to say the least.

[LeoTheNinjaTurtle]

now i am a newb to custom anything or following rules so...

couldnt you weld two barrles together to make a twin chamer barrel? to get past the dumb one barrel only rule, just machine a slot running where the two barrels meet that is paper thin down the entire thing, then just polish and hone it, would the slot effect the paintball?

i dont think it would be a gas hog because most of the air should stay in the chamber it was originally fired into (im guessing, dont flame me)

now that i thought of the whole thing i am stuck on how to lock it, maybe a pressure fit, or a powerful electromagnet?


NOTE: i am just throwing ideas out and have no idea how well or if it will work please dont flame me!!

[itchcocker]

dude u r dumb
jk had to do that...
cutting the slot would affect air use because it would allow another way for the air to get past the ball plus it would be a ***** to mill a tiny slot inside a barrel

[ingenexec]

www.docsmachine.com He did one vee-twin. Looks badass, and i think it even works too

[03vert]

Already been done. check out doc's machine. veetwin cocker. be fun as *** to do though.