Hey all, I was wondering if there was anywhere I could send my Punishers frame in to get it milled for a dye membrane pad. Im not really sure how this works, so could someone explain to me how the membrane pad is hooked up to the outside of the gun as well?
Most of the Anno guys do milling, so go check out that forum.
If you don't have an aftermarket board that has the plug and wire to do it, you need to solder and do the work yourself.
The pad has a wire coming off the back and you plug that into the wire on the aftermarket board. So you can wrap the wire from the back of the pad outside on the grip frame or when you have it milled you can get a slot milled on the recessed part, and you can slip the wire through that.