[dyeboy]

We'll after having my first day of play with my remains, a few problems that are very small, first the screw in the back of the gun by the ram the small ones were coming loos and i managed to lose one also while disassemling so what is the size and speciific name so i could pick one up at home depot, also the trigger is very weak and sticky, like sometimes not even returning i tried adjusting the spring tension but it wasn't doing anything just remained the same, also while puting my eye covers back on the gun the bottom screw, when i screwed it on the head wehere the allen key goes got stripped and i can't get it off any suggestions on how to, but i have to say this gun is so awesome and surprisingly tiny, smaller than i thought, the stock barrel is great top, just as good as my ul and my friends stiffy.

[Mind'sEye]

Info on screw sizes here:

Remains

Body/Frame/Ram- 2 Button Head Socket 6-32 x 1/4
Frame/Ram- 2 Button Head Socket 6-32 x 3/16
Upper Eye Covers- 2 Flat Head Socket 4-40 x 5/16
Lower Eye Covers- 2 Flat Head Socket 4-40 x 1/2

I suggest that you dis-assemble the gun and check the condition of the spring and adjustment set screw. If the set screw has been turned in too far it can create problems. There's a warning (!) in the Remains manual, under trigger adjustment, about this.

[dyeboy]

any on how to ge the screw out

[The EastCoast Kid]

take a slightly smaller allen key and put at a 15* so your digging into the side of the screw and twist it out that way, same thing happened to my screws they were poop quality. if you can find stornger screws i suggest replacing all of the eye screws not just the one you stripped.

[Jack Rice]

Take the right size allen srench and super glue it in. they are not in that hard so it will come out fairly easily

[mr2tenths]

tap the top of the screw with a hammer. that will put the metel back in the top of the screw

[dyeboy]

thanks guys will let uknow how it turns out