So, you want the perfect E2 settings...

Dr.StraightPride · 09-09-2006, 10:16 PM

Well, this is about as close as you're going to get without alot of tinkering. These settings are what Dan (WGP tech for all cocker teams) puts on all guns he works on. They will work for 99.9% of all cockers and give you a great balance of speed, reliability and efficiency.

Timing

Sear on - 4
C Delay - 6
C on - 35
C/t out - 1
C off - 24

Filters

Ball - 2
Empty - 2
Pull - 1
Rel - 1
TT band - 37%
TT Tol - 42%

That's about as good as it gets for settings that blanket all e-cockers.

I'magoodboynow (Banned) · 09-09-2006, 10:21 PM

did you put those settings on your e2 cocker? BTW, theres an eblade settings thread in the cocker forum

BTW, got any stickers for me?

Hans I aM · 09-09-2006, 10:21 PM

Gracias

Dr.StraightPride · 09-09-2006, 10:23 PM

Quote:

Originally Posted by I'magoodboynow

did you put those settings on your e2 cocker? BTW, theres an eblade settings thread in the cocker forum

BTW, got any stickers for me?

Right now, they're on my E2 Orry and my E2 Black Magic. Who cares about other people's settings? These ones are guarenteed to work on nearly every cocker. And work well

redsoxfan650 · 09-09-2006, 10:23 PM

would these work on a karni?

worrgames08 · 09-09-2006, 10:24 PM

Thank you sir

Dr.StraightPride · 09-09-2006, 10:33 PM

Quote:

Originally Posted by redsoxfan650

would these work on a karni?

Quote:

These ones are guarenteed to work on nearly every cocker. And work well

Quote:

They will work for 99.9% of all cockers and give you a great balance of speed, reliability and efficiency

Quote:

That's about as good as it gets for settings that blanket all e-cockers.

Nope.

worrgames08 · 09-09-2006, 10:36 PM

vvh@dDa bo0t t3h z3r0 bee karneh?!?!?!

Dr.StraightPride · 09-09-2006, 10:46 PM

Nope, you spelt Zero, B, and Karni correctly... your burn is now nullified.

r37r18u710n · 09-09-2006, 10:50 PM

Quote:

Originally Posted by Dr.StraightPride

Nope, you spelt Zero, B, and Karni correctly... your burn is now nullified.

Oooh, Sticky Blanket Burn!

worrgames08 · 09-09-2006, 10:51 PM

whatchu talkin bout willis?

Mr.Dirt · 09-09-2006, 11:58 PM

I put them in my worrframe and their wicked fast (now nubs come in asking how I did it)

r37r18u710n · 09-10-2006, 12:16 AM

Quote:

Originally Posted by Mr.Dirt

I put them in my worrframe and their wicked fast (now nubs come in asking how I did it)

Nubs my ***, I'm intrigued.

Or did you swap in a Zero-B somehow, you crafty yet loveable bastard?

Mr.Dirt · 09-10-2006, 12:28 AM

Im using an ego frame....but I might mod my old frame to accept Eblade boards.

fight_my_pride · 09-10-2006, 12:42 AM

I Can't Figure Out How To Put Those Eblade Settings On My Racegun

Help Me Oprah Winfrey

Dr.StraightPride · 09-10-2006, 12:51 AM

Shut it, Twitch. You have no power here

This is my domain

NOT EVEN OPRAH CAN SAVE YOU NOW

wiledbill · 09-10-2006, 01:40 AM

I have a woor frame and I can't find a manual for I emailed wgp and I did'nt get a reply,can anyone help thanks

GatoradeA-5 · 09-10-2006, 06:47 AM

What you posted is basically Factory Fast with a few ms taken off the CON (which doesn't matter with the eyes on anyway) and different filters. Those settings are good, but it's possible to shave 4-6 ms off the COFF and 2 ms off CDEL and still be reliable on every cocker I've ever worked with (if you don't have QEVs, you might need the higher COFF).
As far as the filters go, that's definitely gonna bounce a bit.

metal_dragon35 · 09-10-2006, 12:54 PM

even with those seting my karni wont go over 11 with eyes on in psp mode whats up???and im useing a empire on seting 3. i have a low bat could that be it??

vantrepes · 09-10-2006, 01:22 PM

Great settings..... if you want bounce....

First off, the SON time is excessive for anything but the stiffest main spring. Most times, 3.3ms, or 3.5ms would be a better choice to extend battery life. With a sweet spotted reg, and stock springs, I normally end up in that range.

The CDEL time is still excessive at 6ms, unless you have a horrible bolt to body fit. Try dropping it to the 4.5 range, or lower.

As Gator said, CON time is overridden by the eyes, so it has little effect in a properly working gun. If the eyes ever happen to fail, or get dirty, well, there is a good chance the gun will become a blender if it feeds at all.

COFF is about the only number on your list I can come close to agreeing with.

Here's the dirty little secret: There are no best settings for every gun. Each gun has it's own tolerances, and issues. If you want to gas and go, then Factory Fast is the best choice. If you want to tweak for speed, then do if for the gun you have, not the gun some other guy has.

Mr.Dirt · 09-10-2006, 07:54 PM

I thought you can only adjust timing every 1 ms? (or is that just the E1 boards)