how do you adjust the LPR and what detents? - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 09-06-2006, 05:40 PM #1
trevor_clay10
 
 
trevor_clay10's Avatar
 
Join Date: Jul 2006
Location: 262 wisonsin
how do you adjust the LPR and what detents?

alright, i am looking into fine tunning my NME LE and i would like to know how do you adjust the LPR pressure? and what size allen wrench do you need to take the screws out of the LPR?



also my detents are worn down a lot so i am having problems with double feeding resulting in chops, what detents can i buy for my NME?


thanks for all of the help,

Trevor
__________________
This is trevor_clay_10, i am banned until _________
trevor_clay10 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-06-2006, 06:07 PM #2
jayrd21
 
 
jayrd21's Avatar
 
Join Date: Feb 2006
Location: VA
jayrd21 plays in the PSP
jayrd21 supports Cereal Killerz 2
jayrd21 supports Team VICIOUS
jayrd21 supports Pev's Paintball
jayrd21 plays in the APPA D4 division
jayrd21 has perfected Level 1 in PbNation Pursuit
any timmy detents work
and you adyust the lpr with the knob on the very tip of the lpr
unscrew set screw turn to desired pressure (70 psi works best for me) then tighten set screw i can think of the size off the top of my head so check the manual i'm sure its there
__________________
CAMO V3 ROTOR F\S\T CHEAP!
jayrd21 is offline  
Old 09-06-2006, 06:13 PM #3
loser555
 
 
loser555's Avatar
 
Join Date: Jul 2005
Location: SoCal FTW
ugh does anyone read the stickies?
__________________
Z-force pump
loser555 is offline  
Old 09-06-2006, 06:52 PM #4
trevor_clay10
 
 
trevor_clay10's Avatar
 
Join Date: Jul 2006
Location: 262 wisonsin
ok my front block is lose

how do i tighten it do it doesnt move?
__________________
This is trevor_clay_10, i am banned until _________
trevor_clay10 is offline  
Old 09-06-2006, 07:25 PM #5
loser555
 
 
loser555's Avatar
 
Join Date: Jul 2005
Location: SoCal FTW
take off the grip frame and skrew in the skrew under the barb in the body and make sure its in there tight it usually happens after a while of not tightenigng it and make sure u tighten the skrew for your ram cap too
__________________
Z-force pump
loser555 is offline  
Old 09-06-2006, 08:29 PM #6
SEAL 6
The Anti-Hype
 
SEAL 6's Avatar
 
Join Date: May 2006
Location: Nor*Cal
SEAL 6 is playing at Living Legends VI
SEAL 6 has achieved Level 1 in PbNation Pursuit
mine it loose to. just screw in the screw loser told you to do and once you gas up for marker, it will go away. otherwise it is a bit wobbly
__________________
"It can shoot so fast your hopper will catch fire and explode due to the frustration of trying to keep up."
------------------------------------------------------
Bob Long G6R
System X NME LE Black/Silver
(but everyone still loves the minimag)
SEAL 6 is offline  
Old 09-06-2006, 08:35 PM #7
trevor_clay10
 
 
trevor_clay10's Avatar
 
Join Date: Jul 2006
Location: 262 wisonsin
Quote:
Originally Posted by loser555
take off the grip frame and skrew in the skrew under the barb in the body and make sure its in there tight it usually happens after a while of not tightenigng it and make sure u tighten the skrew for your ram cap too

i have to take the grip frame off totaly?

if i do, do i need to unhook anything from my board or noid?

i feel like such a noob
__________________
This is trevor_clay_10, i am banned until _________
trevor_clay10 is offline  
Old 09-06-2006, 08:53 PM #8
SEAL 6
The Anti-Hype
 
SEAL 6's Avatar
 
Join Date: May 2006
Location: Nor*Cal
SEAL 6 is playing at Living Legends VI
SEAL 6 has achieved Level 1 in PbNation Pursuit
take off the grip, then open up the grip frame (only shiny screws) then unscrew the screw that extend unto the body from the top of the grip frame (i thknm there are only two of them.) that is how to remove grip frame

to tighten front block, tighen the forward most screw extentinf into body. if it doesn't budge, it's probably as tight as it can go so leave it alone.
__________________
"It can shoot so fast your hopper will catch fire and explode due to the frustration of trying to keep up."
------------------------------------------------------
Bob Long G6R
System X NME LE Black/Silver
(but everyone still loves the minimag)
SEAL 6 is offline  
Old 09-06-2006, 10:21 PM #9
loser555
 
 
loser555's Avatar
 
Join Date: Jul 2005
Location: SoCal FTW
Quote:
Originally Posted by trevor_clay10
i have to take the grip frame off totaly?

if i do, do i need to unhook anything from my board or noid?

i feel like such a noob
no you can leave all the hoses and wires in place but it might be kind of hard to tighten the front block if the barb is in the way
__________________
Z-force pump
loser555 is offline  
 




Posting Rules
Forum Jump