shocktech reg - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 09-04-2006, 07:19 PM #1
GoNexus1991
 
 
GoNexus1991's Avatar
 
Join Date: Aug 2006
Location: Ottawa, Canada
shocktech reg

I have a dark timmy with a shocktech regulator. I have searched on the internet and cant seem to find a cut-away version or steps to take it apart so i can lube it.
Aswell, i was taking my lpr apart and teh piston fell backwards into the lpr housing. Away ideas on how to take it out? thanks guys
Jonathan
GoNexus1991 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-04-2006, 07:23 PM #2
shutter_elite
'05 rmps champs
 
Join Date: Nov 2004
Location: Wyoming
shutter_elite is a Supporting Member
if im not m istaken its basically a cp reg so go to the cp site and look at the manual
shutter_elite is offline  
Old 09-04-2006, 07:23 PM #3
meshaq27
.
 
meshaq27's Avatar
 
Join Date: Mar 2004
Location: ATL
meshaq27 is a Supporting Member
 has been a member for 10 years
shocktech HPRs are just a CP reg with different milling. In the air systems forum, there is a guide to lubing them.
meshaq27 is offline  
Old 09-04-2006, 07:26 PM #4
GoNexus1991
 
 
GoNexus1991's Avatar
 
Join Date: Aug 2006
Location: Ottawa, Canada
thanks...any clue how to get the piston out?
GoNexus1991 is offline  
Old 09-04-2006, 07:46 PM #5
meshaq27
.
 
meshaq27's Avatar
 
Join Date: Mar 2004
Location: ATL
meshaq27 is a Supporting Member
 has been a member for 10 years
I'm not to farmiliar with the new style LPRs, but I would take the adjustment screw out, and see if you can put the piston out that way with an allen wrench or something.
meshaq27 is offline  
Old 09-04-2006, 07:51 PM #6
GoNexus1991
 
 
GoNexus1991's Avatar
 
Join Date: Aug 2006
Location: Ottawa, Canada
thing is it's stuck in the housing, and i lubed it so it won't move it i turn it upside down. SO the cap, the screw , the coin thing and the spring are out, but the piston's in backwards.
GoNexus1991 is offline  
Old 09-04-2006, 09:16 PM #7
jhviks02
Mad Cow tech
 
jhviks02's Avatar
 
Join Date: Apr 2005
Location: Bellevue, NE
jhviks02 supports Team VICIOUS
try to keep tapping the front of you gun until it comes out
__________________

US Air Force Retired

New feedback Old feedback +50/-0
jhviks02 is offline  
Old 09-04-2006, 09:17 PM #8
SpyderOWNAGE
Super@PBR
 
SpyderOWNAGE's Avatar
 
Join Date: Nov 2004
Location: Arizona
SpyderOWNAGE donated to help Peyton Trent
Take off the back of the LPR (not the front block) and stick a small allen screw into the hole and push it out.
__________________
BearDown

www.APD-Direct.com - Arizona's only authorized dealer for the DLX Luxe
Fort Adobe Paintball Complex - Play on Turf

Green/Purple CCM Series 6 Pump + Gear Stolen!
SpyderOWNAGE is offline  
Old 09-04-2006, 10:21 PM #9
Darthteddy
I LickedHerNeckAndSheCame
 
Darthteddy's Avatar
 
Join Date: Jul 2006
Location: |919| North Carolina
CP recomends a plastic Ball Point Pen So you dont ding or scratch anything
Darthteddy is offline  
Old 09-05-2006, 01:01 PM #10
GoNexus1991
 
 
GoNexus1991's Avatar
 
Join Date: Aug 2006
Location: Ottawa, Canada
thanks
GoNexus1991 is offline  
Old 09-05-2006, 07:33 PM #11
tako-down
tripple O.G. O.G.
 
tako-down's Avatar
 
Join Date: Nov 2003
Location: zone 6
 has been a member for 10 years
if you have the lpr piston in backwards you might have to glue something to the face of the piston to pull it out, done it once. then use some goof off, or paint thinner to get the glue off
__________________
OLD SKOOL FEEDBACK

R.I.P. Allen Booth- WF Marine LEGEND
tako-down is offline  
 




Posting Rules
Forum Jump