hey im having a BIG problem with my wrath ltd and i need help :( - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 07-27-2006, 05:56 PM #1
xnbp10x
♥♥♥
 
xnbp10x's Avatar
 
Join Date: May 2006
Location: New Jersey
xnbp10x owns a Planet Eclipse Ego
xnbp10x plays in the APPA D5 division
xnbp10x supports DLX Technology
hey im having a BIG problem with my wrath ltd and i need help :(

hey ok this is my problem....
well i put my tank in and it can shoot but the gauge says that its wayyyyy over 600 and i dont know how to change that. also, how do i change the velocity oof my gun? do i cahnge it from under the regulator or under the barrel?? and when i tested the velocity it kept going from 50 then to 400 idk y it just kept changing.. please i really need help
thanks
__________________
121+ Feedback
86+ Old Feedback System
37+ New Feedback System
xnbp10x is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-27-2006, 05:59 PM #2
mrb2kwitpds (Banned)
South pride.
 
mrb2kwitpds's Avatar
 
Join Date: Aug 2005
Location: 713
your pressure should not be over 600, it needs to be at 250, and you change the velocity from the regulator under the barrel, the lpr
mrb2kwitpds is offline  
Old 07-27-2006, 06:19 PM #3
chamorro boy
 
 
chamorro boy's Avatar
 
Join Date: Jun 2006
Location: Arizona
Your HPR should be at 200-250psi and with your LPR (the tube under the barrel) have it screwed out all the way then over the chrono slowly turn it a half turn after each shot to set your velocity.

Edit: more info in the stickies
chamorro boy is offline  
Old 07-27-2006, 06:21 PM #4
lp71590 (Banned)
Bannana'd
 
lp71590's Avatar
 
Join Date: Dec 2005
Location: N o R * JeRsEy
thats not good, you shouldnt gass it up.

200-250 is what the wrath runs at, your at 600 so that means you have a busted reg or you screwed the crew in too much,

unscrew the screw under the reg, almost all the way out
Unscrew the lpr all most all the way out

then start from there

slowly adjust the reg untill the gauge says 240 psi

then go from the lpr to adjust velocity

edit: your 14?, thats pretty koool, im 14 and live in NJ, we should meet up.................

Last edited by lp71590 : 07-27-2006 at 06:26 PM.
lp71590 is offline  
Old 07-27-2006, 11:19 PM #5
GoblyGoop
 
 
GoblyGoop's Avatar
 
Join Date: Feb 2005
you could have also not screw the HPR in enough. Someone else already posted with this exact same problem. Look at that thread.
GoblyGoop is offline  
 




Posting Rules
Forum Jump