Milling The Stock Trigger *PICS* - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 06-21-2006, 10:11 PM #1
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
Milling The Stock Trigger *PICS* and *VID*

Well since there is no thread on doing it already i will give u a step by step instructions on it.

Materials needed:
Stock Trigger(or whatever trigger you plan on milling)
Dremmel
Grinding wheel
Medium and Fine Grit sand paper(cant remember exactly what i used)
some polishing compound
crescent wrench or vise(anything to hold the trigger while milling b/c it gets HOT)
sharpie(not required)

Step 1: take your trigger and with the sharpie mark of the area you want to mill. this makes it easier to know when to stop.
Step 2: put trigger in holding device. if you use a vise be sure to put shop rags or some thing to keep from leaving marks on your trigger.
Step 3: use the dremel to mill away the area you have chosen.
Step 4: use the medium grit sandpaper to smoothe out the rough marks left by the grinding wheel.
Step 5: Use the fine grit sand paper to get the trigger to be the same as the rest of the trigger
Step 6: (Optional) Use the polishing compound to polish the trigger. in most cases the polish wont last through much play but it looks good when you first do it.
Step 7: Reinstall trigger and enjoy your homemade blade trigger.

Pics:




I will get better pics tomorrow when i get my digital camera back
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...

Last edited by rednerve0203 : 06-24-2006 at 09:03 PM.
rednerve0203 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 06-21-2006, 11:06 PM #2
fulleffect6912
XBL: The Ace O Spade
 
fulleffect6912's Avatar
 
Join Date: Nov 2005
Location: mechanicsburg, PA
fulleffect6912 is a Supporting Member
nice job, this thread is a detialed way to do it
props
__________________
Black/ aurora etek: Cure bolt, Ti rammer, VP trigger, Tadao M7 Board, hyper 2, Hybrid grips, Freak, Aurora frame, Aurora CCU kit
Etek Owners Mafia
I'm looking for a SIC impulse, finder's fee paid
my old feedback
SIC Factor
...the sickness 9 out of 10 'ballers prefer.
fulleffect6912 is offline  
Old 06-22-2006, 12:42 AM #3
team_xile
Midwest Whiteout
 
team_xile's Avatar
 
Join Date: Jan 2005
Location: Wisconsin
team_xile plays in the PSP
team_xile plays in the APPA D4 division
team_xile is one of the top 250 posters on PbNation
team_xile is Legendary
team_xile supports DLX Technology
awesome job. Just think...do this mod and the ear bud mod and you have yourself a no cost roller trigger. Awesome mod..kudos.
team_xile is online now  
Old 06-22-2006, 01:00 AM #4
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
Thanks

Quote:
Originally Posted by team_xile
awesome job. Just think...do this mod and the ear bud mod and you have yourself a no cost roller trigger. Awesome mod..kudos.
i was thinking about doing that mod but the tape part just seems really ghetto, but i might do it just to see what it feels like.
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...
rednerve0203 is offline  
Old 06-22-2006, 03:18 AM #5
paintballhead5
Infernal Fury
 
paintballhead5's Avatar
 
Join Date: Jun 2001
Location: Clovis C.A.
paintballhead5 is a Supporting Member
 has been a member for 10 years
paintballhead5 owns a Planet Eclipse Etek
paintballhead5 plays in the APPA D5 division
nice work dude!
__________________
Originally Posted by Vegard:
As an average joe consumer I'd put more trust into Bob in sweatpants than a corporate slick in a suit.

Old Feedback: http://www.pbnation.com/showthread.p...paintballhead5
New Feedback: http://www.pbnation.com/feedback.php?u=2540
paintballhead5 is offline  
Old 06-22-2006, 08:34 AM #6
fulleffect6912
XBL: The Ace O Spade
 
fulleffect6912's Avatar
 
Join Date: Nov 2005
Location: mechanicsburg, PA
fulleffect6912 is a Supporting Member
did you just mill it untill it was a blade, i might try it, i just want to be positve
__________________
Black/ aurora etek: Cure bolt, Ti rammer, VP trigger, Tadao M7 Board, hyper 2, Hybrid grips, Freak, Aurora frame, Aurora CCU kit
Etek Owners Mafia
I'm looking for a SIC impulse, finder's fee paid
my old feedback
SIC Factor
...the sickness 9 out of 10 'ballers prefer.
fulleffect6912 is offline  
Old 06-22-2006, 09:03 AM #7
maurer
 
 
Join Date: Jan 2006
Location: NJ
going to do this now actually, i preped it last night

what is the earbud mod i guess i missed it
maurer is offline  
Old 06-22-2006, 11:03 AM #8
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
Quote:
Originally Posted by fulleffect6912
did you just mill it untill it was a blade, i might try it, i just want to be positve
yea i just milled until i reached the mark i made.


and the earbud mod is in the list of mods in the trigger mod thread

EDIT: here is a link to earbud mod http://www.pbnation.com/showthread.p...hlight=Trigger
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...

Last edited by rednerve0203 : 06-22-2006 at 11:08 AM.
rednerve0203 is offline  
Old 06-24-2006, 11:59 AM #9
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
UPDATE: I am completely finished with milling the trigger. i tried to get it to look lke the slik trigger. it is now extremely light(i dont have a way to weigh it but compared to my newdesignz RIP trigger it feels lighter. Pics will be up soon.

P.S. i also have the trigger pin soaking in a teflon soltion to try and get rid of the friction.
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...
rednerve0203 is offline  
Old 06-24-2006, 12:01 PM #10
Spectre023
Yeah it was me....my bad
 
Spectre023's Avatar
 
Join Date: Jun 2006
Location: Austin, Tx
SWEET!!
i wanna see it
__________________
Pewter Nerve
Blue/Black A-Bomb Intimidator
Black/Blue Ul'd PMR

My Feedback

I've recently noticed that I have been called crazy too many times for it to mean nothing.
Spectre023 is offline  
Old 06-24-2006, 12:11 PM #11
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
well here ya go.

PICS:






and here is the pin soaking in teflon solution. i do not have the pin in the frame. that is the earbud mod holding the trigger in.


EDIT: the more i look at it the more i think it looks like a cp roller instead of the slik but either way it feels really good. i will try to get a vid of me dry firing with low air.
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...

Last edited by rednerve0203 : 06-24-2006 at 12:16 PM.
rednerve0203 is offline  
Old 06-24-2006, 12:19 PM #12
Spectre023
Yeah it was me....my bad
 
Spectre023's Avatar
 
Join Date: Jun 2006
Location: Austin, Tx
wow...looks like you took more than half of the trigger off
thats awsome
__________________
Pewter Nerve
Blue/Black A-Bomb Intimidator
Black/Blue Ul'd PMR

My Feedback

I've recently noticed that I have been called crazy too many times for it to mean nothing.
Spectre023 is offline  
Old 06-24-2006, 12:23 PM #13
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
Quote:
Originally Posted by Spectre023
wow...looks like you took more than half of the trigger off
thats awsome
oh belive me alot of it is gone. there was alot of aluminum dust on the work bench when i was done. lol. it is unbeleivably light but it is still not bouncing.
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...
rednerve0203 is offline  
Old 06-24-2006, 12:24 PM #14
Spectre023
Yeah it was me....my bad
 
Spectre023's Avatar
 
Join Date: Jun 2006
Location: Austin, Tx
sweet, i think thats what im gonna do.....since im poor at the moment
__________________
Pewter Nerve
Blue/Black A-Bomb Intimidator
Black/Blue Ul'd PMR

My Feedback

I've recently noticed that I have been called crazy too many times for it to mean nothing.
Spectre023 is offline  
Old 06-24-2006, 12:31 PM #15
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
Quote:
Originally Posted by Spectre023
sweet, i think thats what im gonna do.....since im poor at the moment
make sure and take your time. i didnt at first and when i looked at the trgger it was wavy and extremely uneven. good luck
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...
rednerve0203 is offline  
Old 06-24-2006, 12:33 PM #16
Spectre023
Yeah it was me....my bad
 
Spectre023's Avatar
 
Join Date: Jun 2006
Location: Austin, Tx
ill keep that in mind, thanks man
__________________
Pewter Nerve
Blue/Black A-Bomb Intimidator
Black/Blue Ul'd PMR

My Feedback

I've recently noticed that I have been called crazy too many times for it to mean nothing.
Spectre023 is offline  
Old 06-24-2006, 09:01 PM #17
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
UPDATE:

ok i made a vid: http://s36.photobucket.com/albums/e4...VI_5415AVI.flv in the video i have 0 ramping, 0 recharge rate, low air, and low battery. This is with my super lightweight trigger and teflon coated trigger pin(really smoothe feels just like the earbud mod but doesnt use taped to hold it in)

Enjoy!!!
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...
rednerve0203 is offline  
Old 06-24-2006, 09:17 PM #18
fulleffect6912
XBL: The Ace O Spade
 
fulleffect6912's Avatar
 
Join Date: Nov 2005
Location: mechanicsburg, PA
fulleffect6912 is a Supporting Member
that seems to be much smoother, but personally i think the original one looked much more cleaner, but heavyer. nice job... btw, we got stickyed
__________________
Black/ aurora etek: Cure bolt, Ti rammer, VP trigger, Tadao M7 Board, hyper 2, Hybrid grips, Freak, Aurora frame, Aurora CCU kit
Etek Owners Mafia
I'm looking for a SIC impulse, finder's fee paid
my old feedback
SIC Factor
...the sickness 9 out of 10 'ballers prefer.
fulleffect6912 is offline  
Old 06-24-2006, 09:23 PM #19
rednerve0203
Nerve > You
 
rednerve0203's Avatar
 
Join Date: Feb 2006
Location: Alabama
Quote:
Originally Posted by fulleffect6912
that seems to be much smoother, but personally i think the original one looked much more cleaner, but heavyer. nice job... btw, we got stickyed
yeah im not completely finished sleaning it up but it feels much better.

And HOORAY!!!!!For sticky
__________________
-Red Nerve # NRV01310 FOR SALE!!!!

You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...
rednerve0203 is offline  
 




Posting Rules
Forum Jump