SEMI 1 (Mode 1 on the Firing Mode Parameter)
This is the default firing mode which produces one shot for
every pull of the the trigger. This mode is uncapped with the
Break Beam Sensor System (BBSS) enabled.
SEMI 2 (Mode 2 on the Firing Mode Parameter)
This mode is the same as Semi 1 mode, except for the fact that
the rate of fire is capped at 15 balls per second (bps).
RAMP 1 (Mode 3 on the Firing Mode Parameter)
This mode allows the rate of fire to ramp to a maximum set by the Maximum
Rate of Fire with BBSS enabled parameter, once the trigger has been pulled
four times at a minimum rate of 5 pps (pulls per second), and allows this rate
of fire to maintained as long as the required trigger pull rate is maintained.
After the last trigger pull, the ramp can be restarted with a single trigger pull
if that pull occurs within one second.
RAMP 2 (Mode 4 on the Firing Mode Parameter)
This mode is the same as Ramp 1 mode but without the one second ramp
RAMP 3 (Mode 5 on the Firing Mode Parameter)
This mode is the same as Ramp 2 mode but activates at a minimum rate of
7.5 pulls per second