2004 BKO no PDS
Current setup/Attempts to fix
-Moved the regs from minimum to max in 50PSI and ľ turn increments no change.
-Lubed every thing
-I have started from scratch I tried new batteries, noid and lubed every thing and still the same result.
-I have tried to move the HPR from 200 to 500 in 50 PSI increments and moved the LPR from all the way out to all the way in ľ turn increments.
-I have to turn the LPR all the way in just to get the bolt to cycle/shoot it wont move at all unless I do so also with the LPR all the way in and the HPR at 275 it still does not shoot more then 1 foot.
-The gun when I could get it to work would crono at below 180FPS and then after a game it will crono again at 280FPS with out me changing a thing.
-The noid bypass problem is that I can air the gun up at 500PSI and LPR all the way in and it does what it is designed to and blows off then I remove the air and then air up again, this time it charges the noid and blows up the noid.
-What is the difference in the amount of force it takes to move the bolt back and forth with the gun aired up vs. no air? because aired up and no air it takes the same amount of force to move mine back and forth
-I don’t know how to describe this part but it is the holes underneath the block were the HPR and the gauge connect to the gun there is one hole I believe when I try to blow through it with the LPR screw out I can not blow through it same with the screw all the way in is this supposed to be like this?
Now I don’t need you all to tell me how to air the gun I can figure that out thanks for the help with that one. But what I am looking for is the answer to the questions above I don’t know how to make it any more clear in words with out drawing/taking pictures for you all. Now with that said does any one have any idea of what is wrong or need me to explain it better so that I can get some help thanks again?
Last edited by Crayonbreaker : 06-16-2006 at 04:02 AM.