I dont know exactly what they look like or how to install them but I heard that you can get them at radioshack. I also heard that you can just take your gun in and they will get the right ones for you. then you just install them in the ports on your board to enable the modes.
__________________ Wrath Legion Devil Division
Q: Hey wanna listen to Slayer?
A: If we do, I'm gonna end up beating the s*** out of you. But yeah.
they're like 1/4 inch square with a little tab on one end for pulling it out. if you look in one end you'll see two prongs, this end should be inserted in of of the two ports mentioned. the ramp port is easy to find- if you remove the two screws holding the board down to your grip and pull out the board, turn your board toward you so you're looking at the top edge of the board. the ramp port is on the left (aux j1). the other port you'll have to pull up on the face of the board to get to. lift the face of the board til it separates from the bottom and on the botton center of that surface you'll see the j10 prongs. the jumper will actually be inserted perpendicular to the board (geometrically speaking of course)- i shoulda been a rocket surgeon
WRATH LEGION-*-LTD DIVISION
grey Wrath LTD- Freak Kit- Halo B-
SystemX drop w on/off- PMI 72 3000 HP
hey dose any one know what the Valve port dose on the Wrath LTd stock board? What happens if you put a jumper in there?
O and i need some jumpers if any want to help (radio shack got blown over by hurricanes lol and my wrath ltd didnt come w/ a jumper so if any one clould help me out that would be awesome ^.^
Grey Diablo Wrath LTD
Stock Board (Gunna upgrade to the virtue ^.^)
Black quick strip teflon Bolt and Pin
Red halo-B w/ rip drive
PIM 48/3000 Nitro