Screw under valve.. teflon tape/no / how deep - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 05-26-2006, 04:23 PM #1
SP_Imp_32 (Banned)
 
 
Join Date: Feb 2006
Screw under valve.. teflon tape/no / how deep

^^^ lol
SP_Imp_32 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-26-2006, 04:38 PM #2
RuFiO13
Doogan
 
RuFiO13's Avatar
 
Join Date: Sep 2004
Location: Illinois
 has been a member for 10 years
Huh? If you are asking if you teflon it then the answer is no.
RuFiO13 is offline  
Old 05-26-2006, 04:41 PM #3
SP_Imp_32 (Banned)
 
 
Join Date: Feb 2006
how deep does it go in then? it can just keep screwing in
SP_Imp_32 is offline  
Old 05-27-2006, 11:37 AM #4
readthisanddye
 
 
readthisanddye's Avatar
 
Join Date: Mar 2005
Location: lincoln, Ne
Quote:
Originally Posted by SP_Imp_32
how deep does it go in then? it can just keep screwing in
untill it gets snug hopfully

but sounds kinda like your stripping it, i did this with my asa gas through screw, it just kept twisting
readthisanddye is offline  
Old 05-27-2006, 12:20 PM #5
SP_Imp_32 (Banned)
 
 
Join Date: Feb 2006
so its probably stripped? should i just teflon tape it?
SP_Imp_32 is offline  
Old 05-27-2006, 12:23 PM #6
SP_Imp_32 (Banned)
 
 
Join Date: Feb 2006
mostly im having solenoid leak issues right now.. its leaking out of the base of the noid
SP_Imp_32 is offline  
Old 05-27-2006, 01:58 PM #7
readthisanddye
 
 
readthisanddye's Avatar
 
Join Date: Mar 2005
Location: lincoln, Ne
when mine was stripping out i used teflon to hold it in untill i got a new body
readthisanddye is offline  
Old 05-27-2006, 01:59 PM #8
outkast kid
 
 
outkast kid's Avatar
 
Join Date: Mar 2006
Location: Philadelphia
outkast kid is a Paintball photographer
NO! screw it in until its flush with the underside of the body, thats it, you dont want it putting pressureo n the valve and un-seating it

dude, sounds like the imp is too advanced for u to handle, a lot of your problems seem like user error
outkast kid is online now  
Old 05-27-2006, 02:07 PM #9
readthisanddye
 
 
readthisanddye's Avatar
 
Join Date: Mar 2005
Location: lincoln, Ne
Quote:
Originally Posted by SP_Imp_32
mostly im having solenoid leak issues right now.. its leaking out of the base of the noid
is your noid on very well...? maybe its missing that little black pad thing im forgetting the name of lol
readthisanddye is offline  
Old 05-27-2006, 06:04 PM #10
SP_Imp_32 (Banned)
 
 
Join Date: Feb 2006
it is flush with the underside of the damn body.. what the hell... i just asked to see what could be done instead of buying a new body and you have to be a dick... it is not leaking from there.. i dont see you answering on how to fix the leaking solenoid.. maintaining an imp isn't rocket science.. yesterday was just a bad day where all the locktite on my imp gave way.. jesus..
SP_Imp_32 is offline  
Old 05-29-2006, 08:52 AM #11
outkast kid
 
 
outkast kid's Avatar
 
Join Date: Mar 2006
Location: Philadelphia
outkast kid is a Paintball photographer
Quote:
Originally Posted by SP_Imp_32
it is flush with the underside of the damn body.. what the hell... i just asked to see what could be done instead of buying a new body and you have to be a dick... it is not leaking from there.. i dont see you answering on how to fix the leaking solenoid.. maintaining an imp isn't rocket science.. yesterday was just a bad day where all the locktite on my imp gave way.. jesus..
chill out man, read this
Quote:
Originally Posted by readthisanddye
untill it gets snug hopfully
all i was exclamating is that you never just crank on the valve screw until its tight, especially on a delrin valve, ul just destroy it

as for the noid, just take it apart, put it back together and make sure the manifold seal is seated correctly
outkast kid is online now  
Old 05-29-2006, 03:07 PM #12
(^_@)Skitzo
Schizoaffective Disorder
 
(^_@)Skitzo's Avatar
 
Join Date: May 2006
Location: Tampa, FL
(^_@)Skitzo helped look for balloons
it just doesnt get tight at all.. goes right through
__________________
Buy this stuff.
(^_@)Skitzo is offline  
Old 05-29-2006, 07:58 PM #13
Slow_Target
 
 
Join Date: Dec 2001
Location: South Jersey
 has been a member for 10 years
I haven't had mine out in a while, so i'm going by memory. The screw that you are asking about is fairly course thread and difficult to strip without really cranking on it. Are you sure that the valve body isn't upside-down and your going into the exhaust port? Or maybe the valve body isn't in the correct position and it is missing it completely? The valve body has a blind hole, does it continue to go deeper or just keeps turning?
__________________
Equalized Black Impulse #9792, Kapp on/off, Check-it low-rise, Dye 71/45, full Freak, JHII, SS RatHole, SP Mag trig, NDZ Equalizer bolt, Slik-Shot & R.I.P. valve, Hybrid grips.
Gen-E LCD#22139, toxic breach, Gold Evolve, ccm feed, cp reg & asa
99 Shocker Turbo/SelectFire #7069
"Originally posted by wolverine Be a man and pick a side of the fence and stay there. "
Slow_Target is offline  
Old 05-29-2006, 08:34 PM #14
(^_@)Skitzo
Schizoaffective Disorder
 
(^_@)Skitzo's Avatar
 
Join Date: May 2006
Location: Tampa, FL
(^_@)Skitzo helped look for balloons
yeah it goes all the way through
__________________
Buy this stuff.
(^_@)Skitzo is offline  
Old 05-30-2006, 05:23 PM #15
Slow_Target
 
 
Join Date: Dec 2001
Location: South Jersey
 has been a member for 10 years
The valve body has a blind hole (only goes in a short way 1/8-1/4") and an open hole (goes through into the valve). The open hole goes up towards the top of the marker and the blind hole goes down to the locating screw. Are you sure it is in correctly?
__________________
Equalized Black Impulse #9792, Kapp on/off, Check-it low-rise, Dye 71/45, full Freak, JHII, SS RatHole, SP Mag trig, NDZ Equalizer bolt, Slik-Shot & R.I.P. valve, Hybrid grips.
Gen-E LCD#22139, toxic breach, Gold Evolve, ccm feed, cp reg & asa
99 Shocker Turbo/SelectFire #7069
"Originally posted by wolverine Be a man and pick a side of the fence and stay there. "
Slow_Target is offline  
Old 06-01-2006, 11:46 PM #16
hemmingson28
WANT SOME...
 
hemmingson28's Avatar
 
Join Date: Jan 2004
Location: WA
 has been a member for 10 years
first of all what valve do you have?? stock goes all the way threw where an evil or ndz has the "blind hole" we'll call it, either way the set screw should stop flush with the body, if you screw in any farther on a stock valve youll actually screw into the valve pin, hope this helps
__________________
E1'D 05 COCKER FOR TRADE
http://www.pbnation.com/showthread.php?t=2219144

I DONT ship first, been on the nation over 3 years never had a bad feedback...dont ask.
feedback below
http://www.pbnation.com/showthread.p...hreadid=394098
NEW FEEDBACK IS B/S WHAT IS THIS EBAY??

Last edited by hemmingson28 : 06-01-2006 at 11:51 PM.
hemmingson28 is offline  
 




Posting Rules
Forum Jump