[Paintsplat6]

Guys, i just started using my strange imp, put a blackheart on it and it rips for a while, then blows an o-ring in the reg the guy put on it before me. The reg is a max-flow off of a new shocker, it is great for consistancy, but it just blew another o-ring in the last scenario I was in, i love the gun and need some help!! Thanks guys

[homerj]

is it the o-ring that the piston slides in? if so i had the same problem. i scavenged a urethane washer from another reg & put it in place of the o-ring. i didn't think it would work because it was such a tight fit around the piston but it has worked great so far.

[slimjimdave]

if its the piston you need a better on off. i had the some problem with my shocker reg. if you have a crappy on off that just lets the air in real fast it will shock the oring thingy in there with tons of presure and destroy it. and i was blowin more orings then paint. my friends would make fun of me and say i really need to carry pods of orings. but i bought a nice cp on off and i havent blown a oring since i got it, and i have had it for about a year.

[Paintsplat6]

It's a brand new cp w/ a bleed off. Where could i get one of the washers u were talking about, btw thanks!

[homerj]

i got it out of a stock bko reg. i have no idea where you'd find one other than that though.

[Paintsplat6]

Any Other Ideas Guys????? Thanks for all the help!

[Paintsplat6]

????

[Batty1589]

You could try heading over to your local hardware store not like lowes or homedepot but to the small hardware store and go to the plumbing section, their they should have a selections of o-rings and washers made from different materials