[Bushy86]

Ok, i have two shockers sitting here. One is leaking from the gasket, but its not the gasket thats leaking. I have tried a different noid and gasket that work on my other shocker. Heres the pics that show exactly where the leak is coming from:


The leak is coming from the right of the highlighter. There is a channel there.

Hole is right above the end of the allen key.


I had a similar problem with a viking a while back, when part of an oring was suckied into one of the holes in the body that leads to the solenoid. Blocked the hole and caused a leak. Im going to say that this is along the same lines, but how would i get the debris out of the hole? Theres 3 holes and i really have no way of getting into any of them. ANy ideas?


Thanks people!

[Skyle]

I had a very similar leak, this link to ZDS is where I found my answer:
http://www.zdspb.com/tech/mguide/sho...ifoldleak.html

[TeamIronR]

Its and Oring on the bolt.
No lie.
I work in a PB store, and fix it all the time.

Just change out every oring on the bolt, i'd bet its about that time

[Bushy86]

omg thnaks d0d, that helped out sooo much!

I just replaced what ydna's site told me 2 do, not the entire bolt. I tried putting the entire kit from my other shocker into the one that wasnt working, and it still did not work. idk what i did that made it work, but w.e, it works!

thanks guys!