[pu pu pump]

okay well yesterday i was cleaning up my shocker(which im fairly new too)
and when i took out the firing chamber the two side o rings broke
so i go to put some new ones on and they wont stay its werid
i have the right size orings too

i probly didnt explain that too well so here.... its step for i cant get the orings on tips please....

http://www.zdspb.com/tech/mguide/sho...bolt_ndz3.html

[Darkassaliant]

It's probably in all the way you're just not aligning it right, take some time to get mastered but just fiddle with it untill it seals.

[ecordell]

Ok so you have a NDZ Firing Can correct? If so, i've found that tank orings work pretty well for the side seal that you need, just snap them in and put a little lube on them before you do, aline the firing can correctly and reinstall the can...

[pu pu pump]

okay i was doing it then as they were sliding into place the orings came out so i went to redo it and now the firing can only is stuck the bolt came out, the firing can is in the right place but the orings r off, like i can see them in the (((0))) any ideas how to get it out ?

[pu pu pump]

k my firing can and end cap r stuck and help?

[Box]

Get something with a soft tip and hit that simething with a hammer to remove the can.

[pu pu pump]

okay so like maybe a squeegie and stick in in the body, ive tried but its in there perfectly so it doesnt really stick out much ill try anyways