[Unimoose]

I did the mods on this 98C myself. Stripped it, milled the letters off the side, filled the cocking rod hole, moved the battery and switch for the E bolt, replaced the trigger spring with a magnet and added a trigger stop to make it a 3 way adjustable trigger...


This is my phantom with some upgrades from Punisher, grips from BlueFish and some CF goodness...

And finally Bloodlust, a complete one off set up by Punisher!

[frankum..]

heres mine, specs in sig.

[Deus Machina]

Meet Mr. Rogers. The world's first pump-action, pneumatic assist Spyder.

[**Entropy**]

My dremeled matrix. Enjoy.

[golfkiller]

Hi here is my Spyder Victor 1 aka Czech Assault rifle SA v.z. 58

[boniface]

The m4 .50cal sniper

[shiro]

My custom rainmaker:



started life as 99 rainmaker

-cp 10" blue barrel
-ergo reg
-stock autococker lpr
-silver pm6 frame with stock grips
-thunderboard lcd
-frontblock with macmount, frame adaptor and cocker asa (made by rainman229)
-backblock volume chamber (also made by rainman 229)
-macro line
-modded shourd

about 15 bps and plays very tight

i know there are a few custom rainmakers around but this is the only one with a pm6 frame.

video:
this is just a quick made video the regs and dwell are not set right on the marker and i am walking the trigger slowly becuase i suck at speed shooting, i play pump.

http://media.putfile.com/rainmaker-56

[gremlin75]

Here is my custom cocker (Milling was done by Ken at K&P)



And my custom trix...onld pics a coupld parts have been changed (Milling was done by the Ironman milling originator mr2tenths)



later
gremlin

[afrotc465]

Custom NINJA Ion



Batman takes a bite of crime

[Kohawk]

[blackpaint]

This happens to be a PIC THREAD!

my custom shocktech dm3 and pm6

[POP-POP]

My Wrath

[nerve2030]

bolt action spyder all the internals made by me save the valve body. most of the external parts modified

[Bladermendoza]

took me a while but yah i did it took a lot of milling though

[FA22RaptorF22]

pm5thatsme, noice, but that gun deserved the ego frame, it would have fit much nicer, good work tho.

here's mine, since everyone is slapping frames on stuff:

[Bobtheballer]

It isn't mine but i thought it looked cool

[Its A Sabotage]

other custom board mods and a predator chip, shoots (not cycles) 45BPS. eventually im planning to do the internal eye mod. but i mounted the frame using the stock DM holes and drilled and tapped the frame

[cockerpunk (Banned)]

my new custom hottness -

[GM Custom]

here a pic of my spyder-aug

[A.C. Basbas]

My Space-PGP, loosely modeled after the Space-Mags.

The welding was tough; I wanted to leave the brass raw so I had to be careful... The barrel is only 12 inches, and stops 4 inches short of the end of the brass shroud, so it's pretty loud for a PGP. I think for Space-PGP v2.0 I'll use a spiral ported all-american barrel, and match the barrel length to the shroud length.

[Oscum Guy]

spimmy

imagine

e99