[qhimq]

Drool, Cry, Tear, Yell

'The Tragedy'
- Coming Soon (Still a little rough from the hours of hacksawing/dremmeling)





Setup:
Alias Timmy noid
Alias ram sleeve
Eigenram (12gram timmy ram) and Stock 2k2 ram (using for troubleshooting...)
NDZ ram cap
System X NME LPR/Block
Alamo pb t1 bolt
Speedneck
Dragun custom milled body
t1 frame
t1 board w/ultra chip
SD eye that doesn't see bolt
Empire Inline Regulator
Empire nano rail + Chrome System X on/off
0-160psi measuring lpr
0-300psi measuring inline


*update*



<><><>><><><><><><><><><><>

VIDEOS:
<><>><><><><><><><><><><<
The worst possible video

I finally got to upload this POS. Its half cycling in the video very badly.



low tank.

Better cycling, but then tank got low at the end

[Mihlrad]

uhhh no offense but... ew? You have any idea how much **** is gonna get in there for one?

[cockerstar001]

Originally Posted by Mihlrad

uhhh no offense but... ew? You have any idea how much **** is gonna get in there for one?

ramsleeve much?

[tippyjack]

Originally Posted by Mihlrad

uhhh no offense but... ew? You have any idea how much **** is gonna get in there for one?

wft are you trying to say.

Looks good so far. The milling looks really cool imo, keep us updated.

[qhimq]

i am not going to drag my gun sideways in a big sand pit and then assume my gun will be ready for action...I dislike diving anyways, and I would never ever play in a field with sand, thats just dumb, kinda like never ending a sentence after a paragraph.

Thanks, I thought it had some potential as a teaser

[Catalyst Paintball]

Im lost.

You can run a Reflective (Shocker Eye) with a T1 Frame?

Years ago when I was messing with these Spimmy/T1'd Spyders I thought they were BBE only. And I find it hard to believe that you can go from the Shocker Ribbon eye to the T1 board.

[qhimq]

I have been told same boucebeam eye from Senerio Dreams is the same eye in shockers now.

*shrug*

BBE=Break Beam Eye? or Bounce Beam Eye?

the body is stock milled for bounce beam. And lets not get into a debate on which eye system is better, cuz frankly i don't care . I know the stock bouncebeam eye worked pretty good, except for it reading the black bolt but I hear this eye doesn't see it because of the adjustablity of the t-board.

[qhimq]

o, no one used a t1 frame before for spimming, they all did the clamshell stuff.

i'm going the extra mile and i'm dremmelling the frame to fit a timmy noid, so i don't have to waste $ on a clamshell.

[Catalyst Paintball]

When I used BBE, I meant Break Beam.

Do you mind taking a picture of your T Board? Im really curious to see how that Shocker Eye is going to fit.

[qhimq]

Its the port with 4 pins left of the bottom red button...

idk if its a shocker eye but others told me it is.

new pics of the body tonight its 100% better.

[angel4life1]

Its not actually a shocker eye, but the component is the same. The T-board eye uses wires instead of a ribbon. qhimq, the milling looks pretty good.

[RagingItalianMan]

yea...shockers use a ribbon. btw that lok somewhat like an eblade eye connecter.

[JT Pimp]

Just buy the eyes from www.scenariodreams.com , they are only like $10.

[qhimq]

I already got the SD eye

[qhimq]

no more rivits on the top of the body
front of feedneck is rounded

[angel4life1]

Looks good, just sand everthing smooth.

[qhimq]

trying my best , my file is kinda hard to get in those curvy places.

[angel4life1]

if you cant get your file in there try using sandpaper over your fingers it works for me all the time. There is also a dremel attachment that is a grey disk, that will sand it pretty smooth.

[JT Pimp]

Originally Posted by qhimq

trying my best , my file is kinda hard to get in those curvy places.

Sand paper FTW

[Nemrod]

Use SAND PAPER not a file. File is for getting rid of bigger areas. Sanding is usally to make it curvy which is what your trying to do AND make it smoother. Use SAND paper.

[qhimq]

the file i'm using makes it look better than the sandpaper i'm using

what grades should i be using to get that mirror shine, I so desire