Official Picture Thread

ubermich · 07-08-2005, 02:21 PM

My beloved XTS with 14" whisper barrel and system X drop on/off

CptObvious · 07-12-2005, 11:15 AM

Here is my VM68 with 2 position CAR stock and 16in brass barrel. A team mate of mine has TEN of these things and he let me have one. (Obviously I have to pay it off...). This thing is such a beast. Heavy mofo, too when fully loaded and it sucked a 16oz dry in just over 30 minutes this past weekend during DDay. I can get it to shoot decently fast, too. I am going to make it look like an M16 eventually with the tri-foregrip, sight rail and mag kit.

xsuperfyaznguyx · 07-14-2005, 03:20 AM

Camo Bandit Kyle · 10-28-2005, 06:05 PM

My custom PGP. Work done by Doc from Docs Machine.

d4rksabre · 10-30-2005, 11:37 PM

I just picked up this classic VM-68 Magnum from a kid in one of my classes. He had no idea what it was and sold it to me for $40.

Uranus · 10-31-2005, 12:35 AM

My fixer-upper got it for allmost nothing

http://www.mcarterbrown.com/images/m...Uranus/PGP.jpg

fred0000 · 01-11-2006, 04:10 PM

My P-68 AT, got her for free

never get rid of this one.

PsychoBaller · 02-08-2006, 03:22 AM

So.... I finally finished the stock on my Palmerized Sheridan Spring-Fed KP2... booya to ya, enjoy!

-baller

Swoope · 02-19-2006, 08:10 PM

aint she purty

xsuperfyaznguyx · 02-19-2006, 09:02 PM

Swoope Nice grips. Where did you get them?

Swoope · 02-20-2006, 09:50 PM

the grip frame is from a PT extreme the grips are from hough i believe (sry if im wrong i bought it that way)

foilboy · 03-11-2006, 04:28 PM

duuude...how did you put a 'cocker frame on a PGP up there???
I'm gunna buy a PGP, how easy is that modification?

SteveT44 · 03-29-2006, 06:59 PM

This is a modified XTS Nemesis fitted into a radio controlled model tank. The front handle was machined down and used as the elevate pivot point.

This XTS was built from spares from my tank hobby. CMI 16" QB barrel, Starfire bolt, and a 45mm red dot scope. The stock scope mount was moved forward and rotated to the left 45 degrees. If I get serious with paintball I'll get a QLoader and mount it up front under the barrel and feed balls from the bottom for a nice low profile marker.

Steve T.
http://www.rctankcombat.com

killbot · 04-01-2006, 02:15 PM

Heres my pgp2k, all done at home

krsone · 05-05-2006, 10:26 AM

nuttin special

Jaan · 05-13-2006, 03:58 PM

Here ya' go ... last week I played a great all pump game put on by the field manager at a local field . This gun shot great. This is a picture at the end of the day when she's all dirty and battle scarred:

american_lesion (Banned) · 06-11-2006, 08:01 PM

http://putfile.com/pic.php?pic=5/13011045492.jpg&s=f5

my beautifull VMX! ProTeam Products rebuild of the VM-68

killbot · 06-14-2006, 09:18 PM

did some more work on mine

SpyderMike · 06-26-2006, 09:06 PM

my PGP in action

very nice Killbot

crunchy kittens · 08-29-2006, 01:52 AM

it started out as a pre 2k1 PGP.

i ended up completely resoldering everything, including the barrel and lower tube. the ram arm is a piece of hollow brass tube with steel inserts soldered into both ends for strength. (i trashed my first one because the steel bolt pin ended up chewing through it after a few cycles.

)

these pics are a bit old. i have since cleaned up the excess solder and everything has been polished and the frame repainted flat black(airbrushes rock).
i'll get the latest pics up soon.

Diomedes · 09-04-2006, 02:07 PM

My nickel plated goodness, a P68 Magnum: