[shrimfririceeeee]

which side do i hit the trigger pin on a pm6?to take it out?

[flipish]

you hit the opposite side of where the 2 notches are. If you look at the trigger pin, one side is smooth while the other side had 2 notches, you want to hit the smooth side into the trigger pin to push it out the other side

[WayOutThere]

Also you will notice that the pin is flat on one side punch it out on the other side.

[shrimfririceeeee]

i dont see any notches>?

[lilshocker07]

Hit it on the side of the first picture.

If you are looking at the back of the gun, hit the pin on the left side and it will come out the right side.

[iOn 0wN3r]

shouldnt it be reversed^ (shouldnt u hit it where the pin is depressed in the frame?) dont listen to me though. i'm not gonna mess with it, i'm just gettin a UL frame

[baver10]

Originally Posted by lilshocker07

Hit it on the side of the first picture.

If you are looking at the back of the gun, hit the pin on the left side and it will come out the right side.

Opposite

[vinceeyy]

i would hit it from the second picture.
or if that is unclear, hit it from the side that the pin is deepest.
-vince

[30-06 (Banned)]

eenie meenie miney moe...

[Seek_and_Destroy]

Originally Posted by 30-06

eenie meenie miney moe...

hahahahhahaah, that's what i do